HP Application Software Suite for Microsoft Hyper-V manual Analyze-vCopy, Unmount-vCopy, Cleanup

Analyze-vCopy

The Analyze-vCopyanalyzes Virtual Copies for errors. When any Virtual Copy records contain a volume missing on storage system, the Virtual Copy with an error is flagged. The user can use the option to analyze and repair inconsistent Virtual Copies.

Preconditions

The user must first login with Login-Rmh.

Syntax

Any optional parameters require square brackets [ ] around them.

Analyze-vCopy -RmhServerName <RmhServerName> -HypervName <HypervName> [-VcNamesUuids] [-VmNamesUuids] [-Timestamp] [-Cleanup] [-Verbose]

Table 32 Analyze-vCopyparameters

Parameter	Optional/Required	Description
-RmhServerName	Required	Host name of the RMH Server. This is
		FQDN or IP address.
-HypervName	Required	Optionally select Hyper-V host/cluster
		to use. If not specified, Hyper-V
		host/cluster must be selected using
		Select-Hyperv. This is FQDN or IP
		address. Synonyms for Hyper-V are
		supported. The localhost is not
		supported.
-VcNamesUuids	Optional	Select VCs by name/uuid using a
		comma-separated list. If not specified,
		VCs name/uuid is not used to filter
		selection.
-VmNamesUuids	Optional	Select names/uuids to filter VC selection
		by VM. If not specified, VM
		names/uuids is not used to filter
		selection.
-Timestamp	Optional	Specify timestamp of VC to locate in
		the format mmddyyhhmmss.
-Cleanup	Optional	If specified, Analyze-vCopywill
		clean up the inconsistent VC by
		removing it. Removing the inconsistent
		VC will take the same action as the
		Remove-vCopycommand. If there are
		no inconsistencies, the VC is not
		removed. Without this option, the same
		work is performed except no action is
		taken to remove the VC. Instead, the
		user will be given an error report.
-Verbose	Optional	Displays progress messages.

Unmount-vCopy

Unmount-vCopyunmounts currently mounted Virtual Copy volume(s) for the specified Virtual Copy and Virtual Machine name. The Hyper-V host used in Login-Rmhis used by the mount command.

Preconditions

The user must first login with Login-Rmh.

54 Using PowerShell Snap-in Command Line Interface