GW Mode
When GW mode is selected, the access point will enter the gateway mode, and the wireless connection will be set up from a
Client Mode (Infrastructure)
If set to Client (Infrastructure) mode, this device can work like a wireless station when it’s connected to a computer so that the computer can send packets from wired end to wireless interface.
LOGIN
1.Turn on your computer and connect it to the Wireless G Broadband Travel Router with an Ethernet cable.
2.Make sure your wired station is set to the same subnet as the router:
192.168.1.254.
3.Start your Web browser. In the “Address” field on the menu bar, enter “http://192.168.1.254.”
NOTE: No username or password is required for the initial login; you do, however, have the option of setting up a username and password for added security. (See the Password subsection in Configuration via the Web/Other.)
INITIAL SETUP | |
|
