-Use 802.1x Authentication:
Select 64-bit or 128-bit encryption. Select “HEX” if using hexadecimal numbers
(0-9, or A-F). Select “ASCII” if using ASCII characters. Ten hexadecimal digits or five
ASCII characters are needed if 64-bit WEP is used; 26 hexadecimal digits or 13 ASCII characters if 128-bit WEP is used.
-Pre-Shared Key Format: Select “Passphrase” or “Hex” (64 characters).
-Pre-Shared Key: Pre-Shared Key serves as a password. Key in an 8- to 63-character string to set the password or leave it blank, in which case the 802.1x Authentication will be activated. Make sure the same password is used on the client end.
-Group Key Life Time: Enter the number of seconds that will elapse before the group key changes automatically. The default is 86,400 seconds.
•Enable Pre-Authentication:This enables secure fast roaming without noticeable signal latency. Pre-authentication provides a way to establish a PMK (pairwise master key) security association before a client associates, with the advantage being that the client reduces the time that it’s disconnected to the network.
-Authentication RADIUS Server: RADIUS is an authentication authorization and accounting client-server protocol. The client is a network access server which has access to a user database with authentication information and which desires to authenticate its links.
-Port: Enter the RADIUS server’s port number provided by your ISP. The default is 1812.
-IP Address: Enter the RADIUS server’s ISP-provided IP address.
-Password: Enter the password that the AP shares with the RADIUS server.
CONFIGURATION VIA THE WEB | 23 |
|
