initial setup
Hardware Connections
1.Connect the Wireless G Broadband Travel Router to a power outlet.
2.Connect one end of the Ethernet cable to the router and the other end to your desktop or notebook computer.
led indicators
Power |
| |
Wireless |
| |
Ethernet |
| |
|
|
|
|
| |
Power (green) | Solid when device is on. | |
Wireless (blue) | Solid when device is on. | |
| Flashing when receiving/sending data. | |
Ethernet (green) Solid when Ethernet cable is connected.
Flashing when receiving/sending data.
operation modes
The router features three operation modes — AP (access point), GW (gateway) and Client Infrastructure — and is configured at the factory. To change the settings in order to employ more advanced configurations or change the mode of operation, use the included
AP Mode
When acting as an access point, the router connects all stations (desktop/notebook with wireless network adapter) to a wired network. All stations can have Internet access if only the router is connected to the Internet.
INITIAL SETUP
