Huawei B970 manual User Control, Upgrading the device, System Management, Set the Status

Page 13

User Control

In this page the administrator can set some configuration for user.

1Click .

2Set the Status Page:

•Active: You can view the current parameter con- figuration information and the network connection status on the Login page.

•Inactive: The Login page does not display the parameter configuration information and the net- work connection status.

3Set the Connect/Disconnect Option:

•Enable: You can click the Connect/Disconnect button to connect or disconnect the network on the Login page when the dial-up connection mode is Manual.

•Disable: The Login page does not display the Connect/Disconnect when the dial-up connection mode is Manual. You need enter the Connection page to connect or disconnect the network.

4Set the Redirect:

System Management

•Enable: The browsed webpage goes to the device’s login page automatically when the net- work connection is disconnected.

•Disable: The browsed webpage displays error when the network connection is disconnected.

5Click OK.

Upgrading the device

1Click .

2Enter the path or click Browse to select the software image file to be updated.

3Click Upgrade.

•After the system is upgraded, the system

!automatically restarts.

Warning • The software programs for upgrading must come from the official website of Huawei or the official website of the service provider.

•Upgrading the software does not change the configuration of the client.

3

Advanced Settings

9

Image 13

Contents User Guide Wonderful Communication, Mobile LifeAddress Administration Building, Huawei Technologies ChinaPostal Code Safety Precautions Table of Contents Logging In to the Management 1Using the ManagementManagement Page Overview Device StatusViewing Configuration Info Optimized SettingsQuick Setup Viewing Configuration InfoConfiguring PPP Dial-up Settings Configuring PPP Profile SettingsConfiguring Wlan Settings Quick SetupConfiguring Wlan Encryption Accessing the InternetValidating Quick Setup Accessing the InternetCurrent network connection status If PPP Connection is Auto or OnWireless Configuration 2Configuring Your ComputerConfiguration Requirements Configuring the Wireless NetworkConfiguring the Network Connection Configuring the PC NetworkDisabling Proxy Settings Configuring the PC NetworkChanging the Password 3Advanced SettingsSettings OverviewUpgrading the device User ControlSystem Management Set the StatusSIM Settings Setting the Preferred Mode and Band Mobile Network SettingsMobile Network Settings Auto Validating PIN CodeConfiguring the Mode for Searching Network Dial-up SettingsConfiguring the PPP Settings Dial-up SettingsDhcp Settings Dhcp SettingsManaging the Profile List Wlan Basic Settings Wlan SettingsWlan Settings Enabling or Disabling the WlanWlan Advance Settings Wlan Bridge Configuring the MAC FilterDynamic DNS Settings Dynamic DNS SettingsClick Ok Validate Click Apply to validate Delete Click in the Modification columnStatic Route Settings Static Route SettingsEnter the IP Address/ Netmask/Gateway/ Metric Firewall Switch 4Security Settings OptionalLAN MAC Filter LAN IP FilterVirtual Server Virtual ServerSelect Protocol and Status Validate Click ApplyUPnP Settings DMZ SettingsDMZ Settings Select Enable/Disable for UPnP Status toRemote Management What to do if a PC in the LAN cannot access the Internet? 5TroubleshootingWhat to do if a PC in the Wlan cannot access the WLAN? What to do if I forgot the IP address of the LAN interface?Choose Start Run 6Abbreviations