Huawei B970 manual Configuring PPP Profile Settings, Configuring PPP Dial-up Settings, Quick Setup

Page 7

Configuring PPP Profile Settings

•Profile Name: Enter a profile name when the text box is empty.

•Dial-up Number/PPP User Name/PPP Password: Enter these three parameters provided by the internet service provider (ISP). The dial-up number is used to initiate the network call; the PPP user name and PPP password is used to obtain the service authorization provided by the ISP.

•APN/IP Address: Select the mode for obtaining the access point name (APN) and IP address. If the service provider provides the relevant parameters, select Static and enter their values. Otherwise, select Dynamic and the device automatically obtains them.

Configuring PPP Dial-up Settings

PPPConnection: Select the dial-up access mode.

•Auto: The device automatically connects to the Internet and does not disconnect when no data is transmitted.

•On Demand: The device automatically connects to the Internet when data transmission exists. When the duration of no data transmission exceeds the maximum idle time, the device disconnects the Internet connection.

•Manual: The device connects to the Internet after you click Connect on the connection page. For details, see "Accessing the Internet".

Quick Setup

PPPAuthentication: This service is provided by your ISP. For details, consult your ISP.

Configuring WLAN Settings

(Name) SSID: Enter a name for your wireless local

 

1

area network (WLAN).

Using

• The service set identifier (SSID) is used to identify a

WLAN. A PC and the wireless device can perform

the

normal data communication only when they have the

Management

SSID Broadcast: Enable or disable the SSID

same SSIDs. To ensure the WLAN security, do not use

 

the default SSID. You can enter a character string as

 

the SSID, such as MyHome.

 

broadcast.

Page

• Enabled: The device broadcasts the SSID of the

 

WLAN and users can easily access the WLAN. In this

 

case, unauthorized users can also access the WLAN

 

because the SSID is broadcasted.

 

• Disabled: The device does not broadcast the SSID of

 

the WLAN. Before accessing the WLAN, a user must

 

obtain the SSID of the WLAN. In this case, the WLAN

 

security is improved.

 

 

For the convenience of users accessing the

 

Note

 

 

WLAN, you can select Enabled for SSID

 

 

Broadcast when you configure the WLAN

 

3

Page 6 Page 8
Image 7
Page 6 Page 8
Contents User Guide Wonderful Communication, Mobile LifeAddress Administration Building, Huawei Technologies ChinaPostal Code Safety Precautions Table of Contents Device Status 1Using the ManagementLogging In to the Management Management Page OverviewViewing Configuration Info Optimized SettingsViewing Configuration Info Quick SetupQuick Setup Configuring PPP Profile SettingsConfiguring PPP Dial-up Settings Configuring Wlan SettingsAccessing the Internet Accessing the InternetConfiguring Wlan Encryption Validating Quick SetupCurrent network connection status If PPP Connection is Auto or OnConfiguring the Wireless Network 2Configuring Your ComputerWireless Configuration Configuration RequirementsConfiguring the PC Network Configuring the PC NetworkConfiguring the Network Connection Disabling Proxy SettingsOverview 3Advanced SettingsChanging the Password SettingsSet the Status User ControlUpgrading the device System ManagementSIM Settings Auto Validating PIN Code Mobile Network SettingsSetting the Preferred Mode and Band Mobile Network SettingsDial-up Settings Dial-up SettingsConfiguring the Mode for Searching Network Configuring the PPP SettingsDhcp Settings Dhcp SettingsManaging the Profile List Enabling or Disabling the Wlan Wlan SettingsWlan Basic Settings Wlan SettingsWlan Advance Settings Wlan Bridge Configuring the MAC FilterDelete Click in the Modification column Dynamic DNS SettingsDynamic DNS Settings Click Ok Validate Click Apply to validateStatic Route Settings Static Route SettingsEnter the IP Address/ Netmask/Gateway/ Metric LAN IP Filter 4Security Settings OptionalFirewall Switch LAN MAC FilterValidate Click Apply Virtual ServerVirtual Server Select Protocol and StatusSelect Enable/Disable for UPnP Status to DMZ SettingsUPnP Settings DMZ SettingsRemote Management What to do if I forgot the IP address of the LAN interface? 5TroubleshootingWhat to do if a PC in the LAN cannot access the Internet? What to do if a PC in the Wlan cannot access the WLAN?Choose Start Run 6Abbreviations
Top Page Image Contents