Huawei B970 manual DMZ Settings, UPnP Settings, Remote Management

Page 25

DMZ Settings

If your PC cannot run network applications through the device, you can set the computer to access the Internet unlimitedly by configuring the IP address of the computer in the demilitarized zone (DMZ).

However, the DMZ computer is not protected by the firewall. It is vulnerable to attack and may also put other computers in the home network at risk.

1Click .

2Select Enable /Disable for DMZ Status to enable or disable the DMZ service.

3Enter the local IP address of the computer that is specified as a DMZ host.

4Click Apply.

Note	Only one computer can be specified as a DMZ
	host at a time.

DMZ Settings

UPnP Settings

The Universal Plug and Play (UPnP) service allows other network users to control your device’s network features to realize the intelligent interconnection.

1Click .

	Select Enable/Disable for UPnP Status to			4
2
	enable or disable the UPnP service			Security

	Click Apply.
3				Settings

Remote Management
				(Optional)
control of the device either from the home network or
The remote web management allows the access and
from the Internet.
When you are on a trip, you can maintain your device
through the remote web management service. It also
allows your ISP to help you solve the device
problems from a remote location.
	Click	.
1

21

Image 25

Contents User Guide Wonderful Communication, Mobile LifeAddress Administration Building, Huawei Technologies ChinaPostal Code Safety Precautions Table of Contents Logging In to the Management 1Using the ManagementManagement Page Overview Device StatusViewing Configuration Info Optimized SettingsQuick Setup Viewing Configuration InfoConfiguring PPP Dial-up Settings Configuring PPP Profile SettingsConfiguring Wlan Settings Quick SetupConfiguring Wlan Encryption Accessing the InternetValidating Quick Setup Accessing the InternetCurrent network connection status If PPP Connection is Auto or OnWireless Configuration 2Configuring Your ComputerConfiguration Requirements Configuring the Wireless NetworkConfiguring the Network Connection Configuring the PC NetworkDisabling Proxy Settings Configuring the PC NetworkChanging the Password 3Advanced SettingsSettings OverviewUpgrading the device User ControlSystem Management Set the StatusSIM Settings Setting the Preferred Mode and Band Mobile Network SettingsMobile Network Settings Auto Validating PIN CodeConfiguring the Mode for Searching Network Dial-up SettingsConfiguring the PPP Settings Dial-up SettingsDhcp Settings Dhcp SettingsManaging the Profile List Wlan Basic Settings Wlan SettingsWlan Settings Enabling or Disabling the WlanWlan Advance Settings Wlan Bridge Configuring the MAC FilterDynamic DNS Settings Dynamic DNS SettingsClick Ok Validate Click Apply to validate Delete Click in the Modification columnStatic Route Settings Static Route SettingsEnter the IP Address/ Netmask/Gateway/ Metric Firewall Switch 4Security Settings OptionalLAN MAC Filter LAN IP FilterVirtual Server Virtual ServerSelect Protocol and Status Validate Click ApplyUPnP Settings DMZ SettingsDMZ Settings Select Enable/Disable for UPnP Status toRemote Management What to do if a PC in the LAN cannot access the Internet? 5TroubleshootingWhat to do if a PC in the Wlan cannot access the WLAN? What to do if I forgot the IP address of the LAN interface?Choose Start Run 6Abbreviations