Huawei B970 manual 1Using the Management, Logging In to the Management, Management Page Overview

Page 5

1Using the Management Page

Logging In to the Management Page

1Start the Internet browser and enter the address http://192.168.1.1 in the address bar.

2Enter the password, and then click Login.The default password is admin.

Note	To avoid the configuration conflict, only one
	user is allowed to log in to the management
	page at a time.

Item	Description
Optimize	Improves wlan's speed of transmission
	and increases the upload speed of
	Internet Explorer if its version is lower
	than IE 6.0.
Quick Setup	Quickly configures the device.

Connection	Displays the network connection status
	and connects to the network.

Advanced	Configures the advanced settings.
Settings

Security	Configures the security settings.

Logout	Log out of the management page.

Device Status

Management Page Overview

Operation Functions

The following table shows the main operations in the management page.

ItemDescription

Basic Status Displays the parameter configuration status of the device.

The following table shows the status information of the device.

Item	Green icon	Red icon
SIM	The card is valid.	The card is not
		inserted or is invalid.

WAN	The PPP dial-up	The PPP dial-up
	connection is	connection is not
	established.	established.

1

Image 5

Contents User Guide Wonderful Communication, Mobile LifePostal Code Administration Building, Huawei Technologies ChinaAddress Safety Precautions Table of Contents Logging In to the Management 1Using the ManagementManagement Page Overview Device StatusViewing Configuration Info Optimized SettingsQuick Setup Viewing Configuration InfoConfiguring PPP Dial-up Settings Configuring PPP Profile SettingsConfiguring Wlan Settings Quick SetupConfiguring Wlan Encryption Accessing the InternetValidating Quick Setup Accessing the InternetCurrent network connection status If PPP Connection is Auto or OnWireless Configuration 2Configuring Your ComputerConfiguration Requirements Configuring the Wireless NetworkConfiguring the Network Connection Configuring the PC NetworkDisabling Proxy Settings Configuring the PC NetworkChanging the Password 3Advanced SettingsSettings OverviewUpgrading the device User ControlSystem Management Set the StatusSIM Settings Setting the Preferred Mode and Band Mobile Network SettingsMobile Network Settings Auto Validating PIN CodeConfiguring the Mode for Searching Network Dial-up SettingsConfiguring the PPP Settings Dial-up SettingsManaging the Profile List Dhcp SettingsDhcp Settings Wlan Basic Settings Wlan SettingsWlan Settings Enabling or Disabling the WlanWlan Advance Settings Wlan Bridge Configuring the MAC FilterDynamic DNS Settings Dynamic DNS SettingsClick Ok Validate Click Apply to validate Delete Click in the Modification columnEnter the IP Address/ Netmask/Gateway/ Metric Static Route SettingsStatic Route Settings Firewall Switch 4Security Settings OptionalLAN MAC Filter LAN IP FilterVirtual Server Virtual ServerSelect Protocol and Status Validate Click ApplyUPnP Settings DMZ SettingsDMZ Settings Select Enable/Disable for UPnP Status toRemote Management What to do if a PC in the LAN cannot access the Internet? 5TroubleshootingWhat to do if a PC in the Wlan cannot access the WLAN? What to do if I forgot the IP address of the LAN interface?Choose Start Run 6Abbreviations