Huawei B970 manual Virtual Server, Select Protocol and Status, Validate Click Apply

Page 24

Virtual Server

computers in the local network.

Click .

Select Protocol and Status.

Enter the IP address and corresponding port to be blocked from accessing the LAN.

Click Ok.

Validate: Click Apply to validate.

Change: Click in the Modification column.

Delete: Click in the Modification column.

Virtual Server

Your device supports the virtual server to enable external computers to access WWW, FTP, or other services provided by the LAN.

1Click .

2Select Protocol and Status.

3Enter values in the following text boxes:

Name: Enter a name to the service provided by the LAN.

WAN Port: Enter the WAN port of the LAN in which the computer provides services.

IP Address: Specify a computer in the LAN to provide services.

LAN Port: Enter the LAN port of the computer that provides services.

Note

You can also add a virtual server in the

 

following way: select a port from the

 

Common Port list. The Protocol, Status,

 

Name, WAN Port, and LAN Port will be set

 

as the default values. If required, you can

 

change them.

4Click Ok.

Validate: Click Apply.

Change: Click in the Modification column.

Delete: Click in the Modification column.

20

Image 24 Huawei B970 manual Virtual Server, Select Protocol and Status, Validate Click Apply
Contents Wonderful Communication, Mobile Life User GuideAdministration Building, Huawei Technologies China AddressPostal Code Safety Precautions Table of Contents 1Using the Management Logging In to the ManagementManagement Page Overview Device StatusOptimized Settings Viewing Configuration InfoQuick Setup Viewing Configuration InfoConfiguring PPP Profile Settings Configuring PPP Dial-up SettingsConfiguring Wlan Settings Quick SetupAccessing the Internet Configuring Wlan EncryptionValidating Quick Setup Accessing the InternetIf PPP Connection is Auto or On Current network connection status2Configuring Your Computer Wireless ConfigurationConfiguration Requirements Configuring the Wireless NetworkConfiguring the PC Network Configuring the Network ConnectionDisabling Proxy Settings Configuring the PC Network3Advanced Settings Changing the PasswordSettings OverviewUser Control Upgrading the deviceSystem Management Set the StatusSIM Settings Mobile Network Settings Setting the Preferred Mode and BandMobile Network Settings Auto Validating PIN CodeDial-up Settings Configuring the Mode for Searching NetworkConfiguring the PPP Settings Dial-up SettingsDhcp Settings Dhcp SettingsManaging the Profile List Wlan Settings Wlan Basic SettingsWlan Settings Enabling or Disabling the WlanWlan Advance Settings Configuring the MAC Filter Wlan BridgeDynamic DNS Settings Dynamic DNS SettingsClick Ok Validate Click Apply to validate Delete Click in the Modification columnStatic Route Settings Static Route SettingsEnter the IP Address/ Netmask/Gateway/ Metric 4Security Settings Optional Firewall SwitchLAN MAC Filter LAN IP FilterVirtual Server Virtual ServerSelect Protocol and Status Validate Click ApplyDMZ Settings UPnP SettingsDMZ Settings Select Enable/Disable for UPnP Status toRemote Management 5Troubleshooting What to do if a PC in the LAN cannot access the Internet?What to do if a PC in the Wlan cannot access the WLAN? What to do if I forgot the IP address of the LAN interface?Choose Start Run 6Abbreviations