WLAN Settings
•Start IP Address/End IP Address: It is used to define the IP address range that the host can use during the IP address assignment. For example, in the network segment 192.168.1.0/24, the default IP address of the device is 192.168.1.1. The host IP address can range from 192.168.1.2 to 192.168.1.254. The minimum range is a single IP address.
•DHCP Lease Time: The DHCP server automatically assigns an IP address to each device connected to the network. When the leased time expires, the DHCP server checks whether the device is connected to the network. If the device is disconnected from the network, the server assigns the IP address to another device. Thus, the IP address is not wasted.
Note | • The Start IP Address must be smaller than |
| or equal to the End IP Address. |
| • If the DHCP Server is Enabled, the |
| configurations of Start IP Address, End IP |
| address, and DHCP Lease Time are valid; |
| otherwise, you cannot configure them. |
WLAN Settings
Click 
to access the WLAN Settings page.
Enabling or Disabling the WLAN
1Click 
to access the WLAN Enable page.
2Select Enabled/Disabled to enable or disable the WLAN.
3Click Apply.
WLAN Basic Settings
Click 
to access the WLAN Basic Settings page.
◆Wireless Interface
•It refers to the SSID and MAC address, and is used to identify the wireless device.
◆SSID
•Entering a name (SSID) for your WLAN.
•Enabling or Disabling the SSID Broadcast.
14