Huawei Complete Manual for Configuring Your B970 and E970 Network Router

Page 17

•PPP Max Dial Time: Set the maximum waiting time when connecting to the Internet.

3Click Apply.

Managing the Profile List

Click to access the Profile Settings page.

◆Creating a Profile

1Enter the profile information in the text box according to the prompts.

2Click Save.

◆Changing a Profile

1Select a profile to be changed in the Profile List drop-down list. Relevant information is displayed in the corresponding text box.

2Enter the profile information.

3Click Save.

DHCP Settings

◆Deleting a Profile

1Select a profile to be deleted in the Profile List drop-down list.

2Click Delete.

DHCP Settings

Click to access the DHCP Settings page, you can set the mode for assigning IP addresses in a LAN. DHCP automatically assigns IP addresses to the network devices. If you are using the DHCP server, you need to do the configurations on the PC connecting with the device. For details, see "Configuring the Network Connection".

•IP Address: The default IP address of the device is 192.168.1.1.

•Subnet Mask: The combination of the subnet mask and IP address enables the flexible sub netting. By default, the subnet mask is 255.255.255.0.

•DHCP Server: It is used to assign IP addresses dynamically. If the DHCP server is Enabled, it can automatically assign IP addresses for PCs. It is recommended to select Enabled for the DHCP server.

3

Advanced Settings

13

Image 17

Contents User Guide Wonderful Communication, Mobile LifePostal Code Administration Building, Huawei Technologies ChinaAddress Safety Precautions Table of Contents Logging In to the Management 1Using the ManagementManagement Page Overview Device StatusViewing Configuration Info Optimized SettingsQuick Setup Viewing Configuration InfoConfiguring PPP Dial-up Settings Configuring PPP Profile SettingsConfiguring Wlan Settings Quick SetupConfiguring Wlan Encryption Accessing the InternetValidating Quick Setup Accessing the InternetCurrent network connection status If PPP Connection is Auto or OnWireless Configuration 2Configuring Your ComputerConfiguration Requirements Configuring the Wireless NetworkConfiguring the Network Connection Configuring the PC NetworkDisabling Proxy Settings Configuring the PC NetworkChanging the Password 3Advanced SettingsSettings OverviewUpgrading the device User ControlSystem Management Set the StatusSIM Settings Setting the Preferred Mode and Band Mobile Network SettingsMobile Network Settings Auto Validating PIN CodeConfiguring the Mode for Searching Network Dial-up SettingsConfiguring the PPP Settings Dial-up SettingsManaging the Profile List Dhcp SettingsDhcp Settings Wlan Basic Settings Wlan SettingsWlan Settings Enabling or Disabling the WlanWlan Advance Settings Wlan Bridge Configuring the MAC FilterDynamic DNS Settings Dynamic DNS SettingsClick Ok Validate Click Apply to validate Delete Click in the Modification columnEnter the IP Address/ Netmask/Gateway/ Metric Static Route SettingsStatic Route Settings Firewall Switch 4Security Settings OptionalLAN MAC Filter LAN IP FilterVirtual Server Virtual ServerSelect Protocol and Status Validate Click ApplyUPnP Settings DMZ SettingsDMZ Settings Select Enable/Disable for UPnP Status toRemote Management What to do if a PC in the LAN cannot access the Internet? 5TroubleshootingWhat to do if a PC in the Wlan cannot access the WLAN? What to do if I forgot the IP address of the LAN interface?Choose Start Run 6Abbreviations