Zenith XBS245 warranty VCR Mode Tape Recording Sound Setup

Page 29

VCR Mode Tape Recording Sound Setup

VHS Hi-Fi Stereo System/

MTS Broadcast

This DVD+VCR is equipped with the VHS Hi-Fi audio sound system for recording and playback. The informa- tion below gives a brief description of Hi-Fi audio and how to record and play a tape in the Hi-Fi audio mode.

Playback with Hi-Fi Stereo Audio Sound

A stereo TV with AUDIO/VIDEO input jacks or a stereo audio system is required for true stereo playback. To experience the full and rich stereo sound available with Hi-Fi recorded tapes, we recommend the connection of this unit to a home stereo audio system.

1 Set the AUDIO MODE option to HI-FI on the VCR SETUP menu .

SCREEN DISPLAY:

 

LANGUAGE:

 

AUDIO MODE:

HI-FI

BROADCAST TYPE:

 

AUDIO OUTPUT:

 

SELECT

ADJUST

TO EXIT PRESS

 

2position.

(STEREO) POSITION: The left channel sound (L) is heard from the left speaker and the right channel soundSet the AUDIO OUTPUT option to STEREO

(R) is heard from the right speaker.

(LEFT) POSITION: The left channel sound (L) is heard from both speakers.

(RIGHT) POSITION: The right channel sound (R) is heard from both speakers.

SCREEN DISPLAY:

 

LANGUAGE:

 

AUDIO MODE:

 

BROADCAST TYPE:

 

AUDIO OUTPUT:

STEREO

SELECT

ADJUST

TO EXIT PRESS

 

3 Insert a cassette and press PLAY (N). Adjust volume at your stereo system.

MTS (Multi-Channel TV Sound)

This DVD+VCR will decode MTS stereo and bilingual

 

(SAP) off-the-air broadcast sound signals. It also

 

decodes stereo TV sound from local cable companies,

 

as long as they operate on assigned cable frequencies

OPERATION

and use the EIA-recommended MTS stereo/bilingual TV

 

sound system.

 

 

 

Multichannel TV Sound Indicator (MTS)

 

Shows Onscreen as illustrated below when

 

SELECT/ENTER is pressed.

 

One or both of the indicators will light, depending on the

 

MTS broadcast.

 

 

 

TV screen

 

STEREO

 

CH 4

 

 

 

Lights up when a stereo broadcast

 

STEREO/SAP

 

is being received.

 

 

 

SAP

Lights up when a SAP BILINGUAL broadcast is being received.

If only STEREO appears on the TV screen.

The DVD+VCR can record in stereo onto the VHS Hi-Fi audio tracks when the BROADCAST TYPE option is in the STEREO position. The DVD+VCR will also record mono audio onto the mono audio track.

If only SAP appears on the TV screen.

Set the BROADCAST TYPE option to SAP.

If STEREO/SAP appears on the TV screen

Use the BROADCAST TYPE option to select the desired recording mode (STEREO or SAP).

SAP (Second Audio Program) Recording

Some stations transmit a Second Audio Program, which is used for a second language or additional information. When the station broadcasts a Second Audio Program, follow the procedure below to record SAP.

1Insert a video cassette with the safety tab intact.

2SETUP menu).

Do this if only SAP appears on the TV screen or you know the program will use SAP.Set the BROADCAST TYPE option to SAP (VCR

SCREEN DISPLAY:

 

LANGUAGE:

 

AUDIO MODE:

 

BROADCAST TYPE:

SAP

AUDIO OUTPUT:

 

SELECT

ADJUST

TO EXIT PRESS

 

3 Set the desired recording speed (SP or EP) using SPEED.

4 Select the desired channel. SAP should appear on the TV screen.

5You are now recording the program you see and hear on the TV.Press REC/ITR (z) once

6Press STOP (x) to stop recording.

29

Image 29
Contents Installation and Operating Guide Warranty Regulatory Information FCC Part Safety PrecautionsImportant Safety Instructions Table of Contents Remote Control Operation Range Remote control battery installationBefore Use Playable DiscsAbout Symbols PrecautionsFront Panel Display Window Indicates sound mode isDigital Audio PrologicRemote Control RF OUT DVD/VCR OUT Rear PanelANT.IN Digital Audio in OpticalConnections Connecting Antenna/Cable TV toOptional TV Connections Connections Basic TV ConnectionsDVD+VCR Connections Speaker System ConnectionsSpeaker Positioning Game Device Hdtv Receiver Rear of DVD+VCR Front of DVD+VCR Connections Radio Antenna ConnectionsDigital Device Connections VCR Radio Selecting the Input/Output SourceSurround OFF 2CH Stereo Before Operation Sound Mode DescriptionsMini Glossary for Sound Mode When DVD is inserted Sound ModeWhen DVD is inserted and Prologic II indicator lights Sound LevelSurround delay time setting Delay Time SettingCenter delay time setting Dolby Digital mode only Before OperationMenu Selection Before Operation VCR Mode On-Screen Display OSDSetting the On-Screen Display Channel Selection Before Operation VCR Mode Using the VCR Setup MenuPress Menu when finished Ote Before Operation VCR Mode Setting the ClockAuto Clock Set Manual Clock SetGeneral Explanation Before Operation DVD ModeOn-Screen Display On-screen display operationInitial Settings General Operation Before Operation DVD Mode Initial SettingsLanguage PictureRating DVD Parental ControlCountry Code DVD Changing the 4-digit codeSpecial Effect Playback VCR Mode Tape Playback Normal PlaybackTimer Recording VCR Mode Tape Recording Normal RecordingTo pause the recording To record one TV program while watching anotherProgram Priority VCR Mode Tape RecordingChecking Erasing the Timer Program Checking the Recording Time Instant Timer Recording One-Touch RecordTo extend the Recording Time Dubbing and EditingVCR Mode Tape Recording Sound Setup Additional Information VCR Mode Other Features Tape Counter Memory FeatureGeneral Features DVD Mode Operation Playing a DVDMoving to another Title DVD Moving to another ChapterDVD Mode Operation General Features Special DVD Features DVD DVD Mode Audio CD Operation Playing Audio CDs and MP3 discs Repeat Programmed Tracks Programmed Playback with Audio CD and MP3 DiscsErasing a Track from Program List Erasing the Complete Program ListVideo Mode Setting DVD DVD Mode Additional InformationScreen Saver About MP3To listen to non-preset radio stations Radio Operation Presetting Radio StationsListening to the Radio To clear all the memorized stationsPlace the disc with the playback side down TroubleshootingSymptom Cause Solution Camcorder image is not Moisture Condensation Symptom Cause CorrectionAudio in Optical Code Language Language Code ListCode Country Country Code ListSpecifications Speakers AccessoryAmplifier Line 1, Line 2, OpticalReference Page Reference Zenith Electronics Corporation