Zenith XBS245 warranty Before Operation VCR Mode Using the VCR Setup Menu, Channel Selection

Page 20

Before Operation - VCR Mode (Continued)

Using the VCR Setup Menu

1Press MENU and the MAIN menu will appear.

Use v/V to select the VCR SETUP menu, then

2 press SELECT/ENTER.

The VCR SETUP menu will appear.

SET CLOCK

 

 

TIMER RECORD

SCREEN DISPLAY:

ON

LANGUAGE:

 

 

 

 

CHANNEL SETUP

AUDIO MODE:

 

BROADCAST TYPE:

 

 

 

 

VCR SETUP

AUDIO OUTPUT:

 

SELECT

ENTER

SELECT

ADJUST

TO EXIT PRESS

 

TO EXIT PRESS

 

3 Use v/V to choose a desired option on the VCR SETUP menu. Then use b/B to choose a desired setting.

SCREEN DISPLAY

The on-screen display of this DVD+VCR can be turned on or off. SCREEN DISPLAY can be switched between ON and OFF by using b/B.

LANGUAGE

The on-screen programming of this DVD+VCR can be displayed in English, Spanish, or French.

LANGUAGE can be switched among ENGLISH, SPANISH and FRENCH by using b/B.

AUDIO MODE

The DVD+VCR has two separate audio playback systems, the high-quality VHS Hi-Fi system and standard NORMAL mono system. The same audio is generally recorded on both systems. The VHS Hi-Fi system plays on separate (left and right) channels, and the NORMAL system plays monaural sound. The normal track is always played so the cassette can be played on a DVD+VCR that does not have VHS Hi-Fi.

AUDIO MODE can be switched between HI-FI and NORMAL by using b/B.

BROADCAST TYPE (STEREO/SAP/MONO)

Multichannel Television Sound (MTS) carries stereo and/or Second Audio Program (SAP) bilingual signals. Set this display to the desired position when both MTS stereo and SAP signals are received. When only one of the MTS signal is received, the DVD+VCR automatically selects the corresponding receiving mode (Stereo or SAP) regardless of the selected position. For normal operation, the display should be in the STEREO position. The DVD+VCR will then record a STEREO program when available, and record a mono program If the program is NOT IN STEREO.

For weak STEREO and/or SAP broadcasts, changing the dis- play to mono may give clearer sound.

BROADCAST TYPE can be switched among STEREO, SAP, and MONO by using b/B.

AUDIO OUTPUT (STEREO/LEFT/RIGHT)

Used during playback [when AUDIO MODE (HI-FI/NORMAL) is in HI-FI position] for selecting the audio output signals from the AUDIO OUT terminals (L ch and R ch), and RF.OUT.

This display setting should normally be left in the stereo posi- tion, so that when a stereo tape is played, the stereo sound will be heard through the left and right channels. If a mono tape is played and the audio output is set to stereo, the same mono sound will be heard from both left and right channels.

AUDIO OUTPUT can be switched among STEREO, LEFT, and RIGHT by using b/B.

Channel Selection

This DVD+VCR is equipped with a frequency synthesized tuner capable of receiving up to 181 channels. These include VHF channels 2-13, UHF channels 14-69 and CATV channels 1-125.

Preparation:

Connect the DVD+VCR to the desired type of antenna or cable TV system, as shown in Connecting Antenna/Cable TV to DVD+VCR on page 11.

AUTO CHANNEL PROGRAMMING

1Press MENU and the MAIN menu will appear.

2 Use v/V to select the CHANNEL SETUP menu, then press SELECT/ENTER.

The CHANNEL SETUP menu will appear.

SET CLOCK

 

TIMER RECORD

AUTO CHANNEL SEARCH

CHANNEL SOURCE:

 

 

CHANNEL SETUP

ADD/DEL CH:

INPUT SLECT:

 

 

VCR SETUP

 

SELECT

ENTER

 

TO EXIT PRESS

 

 

3then use b/B to select TUNER.

Press b/B repeatedly to switch among TUNER, LINE1 and LINE2.Use V to choose the INPUT SELECT option,

Use v/V to choose the AUTO CHANNEL SEARCH

4 option, then use b/B to find channels.

The tuner will automatically cycle through all available channels in the area and place them in the tuner’s memory.

5ING is complete, make sure the CHANNEL SOURCE is set appropriately (TV or CATV) by pressing v/V and choosing the correct CHAN- NEL SOURCE (TV or CATV) by using b/B using the CHANNEL SETUP menu.

Remember, TV is for the air antenna reception, CATV is for cable or wireless cable connection.After the AUTO CHANNEL SEARCH PROCEED-

6Press MENU to return to the TV screen.

7front panel to cycle the DVD+VCR through the channels in memory.Use CH/TRK (v/V) or CH/PRESET (v/V) on the

TO ADD OR ERASE CHANNELS FROM MEMORY

This feature allows you to add or erase channels from memory manually.

1Press V to choose the ADD/DEL CH option on the CHANNEL SETUP menu. Use b/B to select a chan- nel to add or erase.

2Press SELECT/ENTER to add or erase the channel. Repeat steps 1 and 2 to add or erase channels.

3Press MENU to return to the TV screen.

20

Page 19 Page 21
Image 20
Page 19 Page 21
Contents Installation and Operating Guide Warranty Safety Precautions Regulatory Information FCC PartImportant Safety Instructions Table of Contents Remote control battery installation Remote Control Operation RangeBefore Use Playable DiscsPrecautions About SymbolsFront Panel Indicates sound mode is Display WindowDigital Audio PrologicRemote Control Rear Panel RF OUT DVD/VCR OUTANT.IN Digital Audio in OpticalConnecting Antenna/Cable TV to ConnectionsConnections Basic TV Connections Optional TV ConnectionsDVD+VCR Connections Speaker System ConnectionsSpeaker Positioning Game Device Hdtv Receiver Rear of DVD+VCR Front of DVD+VCR Connections Radio Antenna ConnectionsDigital Device Connections Selecting the Input/Output Source VCR RadioSurround OFF 2CH Stereo Before Operation Sound Mode DescriptionsMini Glossary for Sound Mode Sound Mode When DVD is insertedWhen DVD is inserted and Prologic II indicator lights Sound LevelDelay Time Setting Surround delay time settingCenter delay time setting Dolby Digital mode only Before OperationMenu Selection Before Operation VCR Mode On-Screen Display OSDSetting the On-Screen Display Before Operation VCR Mode Using the VCR Setup Menu Channel SelectionBefore Operation VCR Mode Setting the Clock Press Menu when finished OteAuto Clock Set Manual Clock SetBefore Operation DVD Mode General ExplanationOn-Screen Display On-screen display operationBefore Operation DVD Mode Initial Settings Initial Settings General OperationLanguage PictureParental Control Rating DVDCountry Code DVD Changing the 4-digit codeVCR Mode Tape Playback Normal Playback Special Effect PlaybackVCR Mode Tape Recording Normal Recording Timer RecordingTo pause the recording To record one TV program while watching anotherProgram Priority VCR Mode Tape RecordingChecking Erasing the Timer Program Instant Timer Recording One-Touch Record Checking the Recording TimeTo extend the Recording Time Dubbing and EditingVCR Mode Tape Recording Sound Setup VCR Mode Other Features Tape Counter Memory Feature Additional InformationDVD Mode Operation Playing a DVD General FeaturesMoving to another Title DVD Moving to another ChapterDVD Mode Operation General Features Special DVD Features DVD DVD Mode Audio CD Operation Playing Audio CDs and MP3 discs Programmed Playback with Audio CD and MP3 Discs Repeat Programmed TracksErasing a Track from Program List Erasing the Complete Program ListDVD Mode Additional Information Video Mode Setting DVDScreen Saver About MP3Radio Operation Presetting Radio Stations To listen to non-preset radio stationsListening to the Radio To clear all the memorized stationsPlace the disc with the playback side down TroubleshootingSymptom Cause Solution Camcorder image is not Moisture Condensation Symptom Cause CorrectionAudio in Optical Language Code List Code LanguageCountry Code List Code CountrySpecifications Accessory SpeakersAmplifier Line 1, Line 2, OpticalReference Page Reference Zenith Electronics Corporation
Top Page Image Contents