Zenith XBS245 warranty Sound Mode, Sound Level, Test Tone, When DVD is inserted

Page 17

Before Operation - Sound Mode Descriptions (Continued)

Sound Mode

ote

You can enjoy surround sound simply by selecting one of the pre-programmed sound fields according to the program you want to listen to.

Each time you press SOUND EFFECT button, the sound mode is changed in the following order;

PROLOGIC HALL 1 HALL 2 THEATER

ote

For the DVD, you can select only when PCM indicator is shown in the display window.

Each time you press

 

 

button, the sound mode of

Pro Logic II is changed in the following order;

PROLOGIC MOVIE MUSIC VIRTUAL MATRIX

When you play sound tracks with 96kHz sampling frequency, the output signals will be converted to 48kHz (sampling fre- quency).

Sound Level

You can set the sound level of the desired channel.

Press LEVEL.

1 The level indicator will appear in the display window.

Use b/B to select a desired speaker to set.

2 Each time you press the b/B button, it is changed as the following order;

FL (Front Left) C (Center) FR (Front Right) SR (Surround Right) SL (Surround Left)

SW (Subwoofer) FL (Front Left)

On the 2 channel stereo mode, you can only select the SW (Subwoofer).

PREPARATION

ip

You can select SURROUND OFF (2CH STEREO) mode by pressing BY PASS button.

When DVD is inserted.

You can change the sound mode of DVD (Dolby Digital, DTS, PRO LOGIC, etc) by pressing the AUDIO button on the remote during playback.

Although the DVD contents differ from disc to disc, the follow- ing explains the basic operation when this feature is used.

Each time you press AUDIO button, the sound mode of DVD is changed in the following order;

and

When DVD is inserted and PROLOGIC II indicator lights.

Each time you press

 

 

button, the sound mode of

Pro Logic II is changed in the following order;

PROLOGIC MOVIE MUSIC VIRTUAL MATRIX

ip

You can set PRO LOGIC II mode to Off (2CH STEREO) by pressing BY PASS button and the PROLOGIC II indicator dis- appears.

3 Use v/V to adjust the sound level of the select- ed channel. (-6dB - +6dB)

4 Repeat step 2-3 and adjust the sound level of the other channels.

5If setting is complete, press LEVEL.

Test Tone

This function allows you can easily adjust the sound balance of the speakers from the listener’s position.

1SelectTONE. the test tone mode by pressing TEST

A hiss noise comes out for 2 seconds from each speak- ers in the following order;

FL (Front Left) C (Center) FR (Front Right) SR (Surround Right) SL (Surround Left)

SW (Subwoofer) FL (Front Left)

You can adjust the sound level during operating

2 the test tone, first press LEVEL then press v/V buttons, so that all speakers sound level is same from the listeners position.

During operating the test tone, if you adjust the sound level, it will be paused in the current speaker channel.

3If setting is complete, press TEST TONE.

For your reference

The DVD+VCR memorizes the last mode settings for each source individually.

You can identify the encoding format of program software by looking at its packaging.

-Dolby Digital discs are labeled with the logo.

-Dolby Surround encoded programs are labeled with

the logo.

-DTS Digital Surround discs are marked with DTS.

17

Image 17
Contents Installation and Operating Guide Warranty Regulatory Information FCC Part Safety PrecautionsImportant Safety Instructions Table of Contents Remote Control Operation Range Remote control battery installationBefore Use Playable DiscsAbout Symbols PrecautionsFront Panel Display Window Indicates sound mode isDigital Audio PrologicRemote Control RF OUT DVD/VCR OUT Rear PanelANT.IN Digital Audio in OpticalConnections Connecting Antenna/Cable TV toOptional TV Connections Connections Basic TV ConnectionsDVD+VCR Connections Speaker System ConnectionsSpeaker Positioning Game Device Hdtv Receiver Rear of DVD+VCR Front of DVD+VCR Connections Radio Antenna ConnectionsDigital Device Connections VCR Radio Selecting the Input/Output SourceSurround OFF 2CH Stereo Before Operation Sound Mode DescriptionsMini Glossary for Sound Mode When DVD is inserted Sound ModeWhen DVD is inserted and Prologic II indicator lights Sound LevelSurround delay time setting Delay Time SettingCenter delay time setting Dolby Digital mode only Before OperationMenu Selection Before Operation VCR Mode On-Screen Display OSDSetting the On-Screen Display Channel Selection Before Operation VCR Mode Using the VCR Setup MenuPress Menu when finished Ote Before Operation VCR Mode Setting the ClockAuto Clock Set Manual Clock SetGeneral Explanation Before Operation DVD ModeOn-Screen Display On-screen display operationInitial Settings General Operation Before Operation DVD Mode Initial SettingsLanguage PictureRating DVD Parental ControlCountry Code DVD Changing the 4-digit codeSpecial Effect Playback VCR Mode Tape Playback Normal PlaybackTimer Recording VCR Mode Tape Recording Normal RecordingTo pause the recording To record one TV program while watching anotherProgram Priority VCR Mode Tape RecordingChecking Erasing the Timer Program Checking the Recording Time Instant Timer Recording One-Touch RecordTo extend the Recording Time Dubbing and EditingVCR Mode Tape Recording Sound Setup Additional Information VCR Mode Other Features Tape Counter Memory FeatureGeneral Features DVD Mode Operation Playing a DVDMoving to another Title DVD Moving to another ChapterDVD Mode Operation General Features Special DVD Features DVD DVD Mode Audio CD Operation Playing Audio CDs and MP3 discs Repeat Programmed Tracks Programmed Playback with Audio CD and MP3 DiscsErasing a Track from Program List Erasing the Complete Program ListVideo Mode Setting DVD DVD Mode Additional InformationScreen Saver About MP3To listen to non-preset radio stations Radio Operation Presetting Radio StationsListening to the Radio To clear all the memorized stationsPlace the disc with the playback side down TroubleshootingSymptom Cause Solution Camcorder image is not Moisture Condensation Symptom Cause CorrectionAudio in Optical Code Language Language Code ListCode Country Country Code ListSpecifications Speakers AccessoryAmplifier Line 1, Line 2, OpticalReference Page Reference Zenith Electronics Corporation