GarrettCom 1016, 1024, 1008 Magnum 1000 Workgroup Hubs, Magnum Magnum Magnum, Ordering Information

Page 9

1.4Ordering Information

Magnum 1000 Workgroup Hubs

Installation and User Guide (04/02)

1.4Ordering Information

Magnum 1000 Workgroup Hubs

Magnum 1008

Magnum 1016

Magnum 1024

Eight port 10BASE-T Hub with shielded RJ-45 connectors and front-mounted LEDs. Includes a basic AUI port in the rear; may optionally be ordered instead with an RPM or BPM in the rear port slot. Internal universal power supply, up-link switch on port 1. Stand-alone package, rack- mount brackets optional.

16port 10BASE-T Hub with shielded RJ-45 connectors and front-mounted LEDs. Includes a basic AUI port in the rear and one rear bonus slot for an optional RPM or BPM to be configured. Internal universal power supply, up- link switch on port 1. Stand-alone or rack- mount; brackets (ears) included.

24port 10BASE-T Hub with shielded RJ-45 connectors and front-mounted LEDs. Includes a basic AUI port in the rear and one rear bonus slot for an optional RPM or BPM to be configured. Internal universal power supply, up- link switch on port 1. Stand-alone or rack- mount; brackets (ears) included.

Magnum 10xx-pmDesignates a port module (RPM or BPM) to be factory installed in the applicable rear-mounted bonus slot. (Note that the designated port module option, an RPM or a BPM, must also be purchased as a line item.)

Magnum 10xx-48VDesignates optional 48VDC power supply to be factory installed in the chassis, see Appendix B.

GarrettCom, Inc. reserves the right to change specifications, performance characteristics and/or model offerings without notice.

www . GarrettCom . com

3

Image 9

Contents Installation and User Guide Models 1008, 1016 andMagnum Workgroup Hubs “Ten Series” www . GarrettCom . comMagnum 1008, 1016 and Workgroup Hubs Installation and User Guideand optional 48VDC, 24VDC &125VDC-powered models Installation and User Guide 04/0247823 Westinghouse Drive Fremont, CA GarrettCom, IncPhone 510 Fax 510APPENDIX B OPTIONAL 48V POWER SUPPLY, ADDENDUM TABLE OF CONTENTSPage Revisions The Magnum Line Personal Switches, 10/100MbStackable Hubs, SNMP Optional Personal Hubs, 10Mb seriesConnectors 1.0 SPECIFICATIONS 1.1 Technical Specifications PerformanceSwitches Network StandardsFor 48VDC power input option, see Appendix B Agency Approvals Power Supply InternalWarranty 1.2 Specifications - Repeater Port Modules RPMsMagnum 1000 Workgroup Hubs Magnum Magnum Magnum1.4 Ordering Information 2.2 Product Description - Magnum 1000-series Workgroup Hubs 2.0 INTRODUCTION 2.1 Inspecting the Package and ProductFigure 2.2.1a Front view - Magnum 1008 Workgroup Hub 2.2.1 Magnum 1008 Workgroup HubAC Power Installation and User Guide 04/02Magnum 1000 Workgroup Hubs 115 - 230 VACFigure 2.2.2b Front view - Magnum 1024 Workgroup Hub Configurable Bonus PortRPM-FST Shown Figure 2.2.2c Rear view - Magnum 1016 and 1024 Workgroup HubsOptional PM card Basic AUI portBPM shown PM Ribbon cable with 16 pin headers2.4 Bonus Port Configuration Options - RPMs and BPMs Magnum 1000 Workgroup Hubs Installation and User Guide 04/02Bonus port for optional Basic AUI port PM card BPM shown Figure 2.4a Magnum RPM Cards RPM-BNC, RPM-AUIApprox. 3 inches 7.6 cm Figure 2.4c Physical Dimensions of Magnum Port ModulesApprox Approx. 2 inches 5.1 cm2.4.2 RPM-AUI 2.4.1 RPM-BNC2.4.3 RPM-DTE Connector RPM-FST Fiber ST, Twist-lock Connector2.4.4 JUMPER ACROSS2.4.6 RPM-SMF Single-mode Fiber Magnum RPM-SMFnot used Magnum RPM-TP 2.4.7 RPM-TP Twisted PairMagnum BPM-BNC 2.4.8 BPM-BNC2.4.9 BPM-AUI Magnum BPM-AUI2.4.10 BPM-FST Magnum BPM-FST2.4.11 BPM-TP 2.4.12 Special Option -- Second Bonus Port Models 1016 and LEDs Simplify Network Installation and Maintenance 2.5 Features and Benefits Low cost, stand-alone 10BASE-T connectivityInternal Universal Power Supply with Auto-ranging Workgroup connectivity into a larger networkMagnum 1000 Workgroup Hub Figure 2.6a Magnum 1000 Workgroup Hub in stand-alone configuration2.6 Applications BNC Segment RPM-BNC Server 10241008 10161024 Fiber BPMinstallation requires a 3.0 INSTALLATIONinstalled in any standard 19 inch rack Rack-mount Brackets 3.2 Powering the Magnum 1000 Workgroup Hub3.3 Ethernet Media Connections 3.3.1 Connecting Twisted Pair RJ-45, Unshielded or ShieldedMedia IEEE Standard3.3.2 Connecting ThickNet 10BASE5 AUI 3.3.4 Connecting Drop Cable 10BASE5 DTE 3.3.3 Connecting ThinNet 10BASE2 BNC3.3.5 Connecting Fiber Optic 10BASE-FL and FOIRL ST-type, “Twist-Lock Table 3.3.2 AUI Pin Assignments3.3.7 Connecting Single-Mode Fiber Optic SMF 3.3.6 Connecting Fiber Optic SMA-type, Screw-onat regular intervals you must use the color-coded strand on the associated ports at each end of the fiber optic segment3.3.9 Rack-mounting OPB Optical Power Budget = PTmin - PRminTELCO Industry and brackets are more popular inconsider as a standard for Rack-mounting purpose. TheCollisions When carrier is detected simultaneously on multiple ports, a jam pattern is generated on each port to create a collision condition. When a collision signal from one port is detected, it generates a jam pattern to the other ports 4.2 Magnum 1000’s with BPM Local Bridge Functionality Packet ForwardedFigure 4.2b Internal Packet Filtered Figure 4.2c External Packet MaintenanceForwarded Table 4.2 BPM FunctionalityFigure 4.2e Local Segment Isolation with a Bridge Port Module BPM 4.3 Power Requirements5.1 Before Calling for Assistance 5.0 TROUBLESHOOTING5.3 Return Material Authorization RMA Procedure 5.2 When Calling for AssistanceNo Problem Found APPENDIX A WARRANTY INFORMATIONGarrettCom, Inc 213 Hammond Ave Fremont, CA Attn. Customer Service 5.4 Shipping and Packaging InformationB1.0 SPECIFICATIONS - FOR MAGNUM 1000 WORKGROUP HUBS APPENDIX B Internal DC Power Supply OptionPower Supply Internal -48 VDC Option Power Supply Internal 24 VDC OptionB3.0 APPLICATIONS B4.0 INSTALLATIONFigure B4.1 -48VDC Terminal Block on Magnum 1000’s-48VDCThe GND can be hooked at the last B7.0 TROUBLESHOOTINGB4.1 UL Requirements B5.0 OPERATION