Gefen GEF-DVIKVM-848DL user manual #EDIDBATOLO Function, #EDIDBATOLO param1 param2 param3...param9

Page 22

RS-232 SERIAL CONTROL

#EDIDBATOLO Function

The #EDIDBATOLO function reads the downstream EDID and stores it to any local input.

Syntax:

#EDIDBATOLO param1 param2 [param3...param9]

Parameters:

 

 

param1

EDID bank offset

[1 - 5]

param2

Input

[1 - 8]

Notes:

If param2 = 0, then the EDID in the specified bank is copied to all eight inputs.

#EDIDDETOLO Function

The #EDIDDETOLO function stores the Default EDID (640x480) in the specified Local EDID inputs.

Syntax:

#EDIDDETOLO param1 param2 param3...param9

param1

Input

[1 - 8]

Notes:

If param1 = 0, then all 8 DVI inputs will be set to the Default EDID.

19

Image 22
Contents 8x8 DVI KVM Dual Link Matrix Technical Support Hours Asking for AssistanceTechnical Support Write ToContents GefenPRO 8x8 DVI KVM Dual Link Matrix IntroductionGefenPRO How It WorksOperation Notes Features FeaturesPackage Includes Panel Layout Front PanelPanel Descriptions Control ButtonsBack Panel 1110 1 2 3 Back Panel RS-232 Serial PortHow to Connect the GefenPRO 8x8 DVI KVM Dual Link Matrix Connecting the 8X8 DVI KVM Dual Link MatrixHow to Operate the GefenPRO 8x8 DVI KVM Dual Link Matrix Main Display Displaying the Bootloader VersionFront Panel Display Displaying the Firmware VersionDisplaying the Routing Status Routing SourcesRemote Control Unit Monitor and Source Selection Buttons 1Installing the RMT-16IR Battery IR Remote InstallationEmpty Battery Slot IR Remote Configuration Setting the IR Remote Control ChannelUsing the IR Remote Control Unit IR Remote Control Key MappingEDID. What is it and what is it used for? Edid ManagementRS-232 Serial Control 3 2 3 4RS-232 Features Functions Syntax#EDIDDSTOBA Function #EDIDDSTOLO Function#EDIDDSTOLO param1 param2 param3...param9 #EDIDDSTOBA param1 param2#EDIDDETOLO Function #EDIDBATOLO Function#EDIDBATOLO param1 param2 param3...param9 #EDIDDETOLO param1 param2 param3...param9#LOEDIDTOLO Function #LOCKEDID Function#LOCKEDID param1 #LOEDIDTOLO param1 param2 param3#PRLOEDID Function #PRDSEDID Function#PRBAEDID Function #PREDIDST Function #PRWEBADD Function#SIPADD Function #RSTIP Function#SIPADD param1 param2 param3 param4 #SGATEWAY Function #SNETMASK Function#SNETMASK param1 param2 param3 param4 #SGATEWAY param1 param2 param3 param4#SPORT param1 #FADEFAULT Function #ACTIVEBOLO Function#MASKOUT Function #LOCKPOWER Function#LOCKPOWER param1 #MASKOUT param1 param2#STBYMODE Function #RMTIRADD Function#RMTIRADD param1 #STBYMODE param1Param1 param2 Commands Command DescriptionCommand Param1Syntax Parameters None IP Control View Matrix StatusManage Edid Copy Edid Edid Lock StateManage Edid Set Input to Default Edid Manage Edid Copy Edid Manage Edid Edid Lock State Masking IP Configuration Backup / Restore Power ManagementFirmware Update Procedure Firmware Update========================================================= Waiting for the file to be sent ... press ‘a’ to abort Programming Completed SuccessfullyRack Mount Safety Information Specifications Warranty Product RegistrationLicensing Page Rev A6 Nordhoff St., Chatsworth CA