Gefen GEF-DVIKVM-848DL user manual Specifications

Page 45

SPECIFICATIONS

Video Amplifier Bandwidth

2 x 165 MHz

Maximum Resolution

3840x2400 (dual link)

Input Video Signal

1.2 volts p-p

Input DDC Signal

5 volts p-p (TTL)

DVI Input Connectors

(8) DVI-I 29 pin female

DVI Output Connectors

(8) DVI-I 29 pin female

USB Input Connectors

(8) USB 2.0 type “B”

USB Output Connectors

(16) USB 2.0 type “A”

Audio Output Connectors

(8) 3.5 mm mini-stereo

Audio Input Connectors

(8) 3.5 mm mini-stereo

Frequency Response

< 0.1db 20Hz - 100 kHz

THD

0.002% @ 20 kHz

IR Extender

3.5mm mini-stereo

RS-232 Interface

DB-9 female

IP Interface

RJ-45

Power Supply

100 ~ 240 V AC (IEC connector)

Power Consumption

70 Watts (max.)

Operating Temperature

0 ˚C ~ 45 ˚C / 32 ˚F ~ 104 ˚F

Storage Temperature

-20 ˚C ~ 60 ˚C / -4 ˚F ~ 140 ˚F

Relative Humidity

20% ~ 90% RH (no condensation)

Power Consumption (Standby Mode)

600 mW

Rack Size

2U

Dimensions

17.1” W x 1.8” H x 4.2” D

Shipping Weight

9 lbs.

42

Image 45
Contents 8x8 DVI KVM Dual Link Matrix Technical Support Asking for AssistanceTechnical Support Hours Write ToContents GefenPRO IntroductionGefenPRO 8x8 DVI KVM Dual Link Matrix How It WorksOperation Notes Features FeaturesPackage Includes Front Panel Panel LayoutControl Buttons Panel DescriptionsBack Panel 1110 1 2 3 RS-232 Serial Port Back PanelConnecting the 8X8 DVI KVM Dual Link Matrix How to Connect the GefenPRO 8x8 DVI KVM Dual Link MatrixHow to Operate the GefenPRO 8x8 DVI KVM Dual Link Matrix Front Panel Display Displaying the Bootloader VersionMain Display Displaying the Firmware VersionRouting Sources Displaying the Routing StatusMonitor and Source Selection Buttons 1 Remote Control UnitIR Remote Installation Installing the RMT-16IR BatteryEmpty Battery Slot Setting the IR Remote Control Channel IR Remote ConfigurationIR Remote Control Key Mapping Using the IR Remote Control UnitEdid Management EDID. What is it and what is it used for?3 2 3 4 RS-232 Serial ControlFunctions Syntax RS-232 Features#EDIDDSTOLO param1 param2 param3...param9 #EDIDDSTOLO Function#EDIDDSTOBA Function #EDIDDSTOBA param1 param2#EDIDBATOLO param1 param2 param3...param9 #EDIDBATOLO Function#EDIDDETOLO Function #EDIDDETOLO param1 param2 param3...param9#LOCKEDID param1 #LOCKEDID Function#LOEDIDTOLO Function #LOEDIDTOLO param1 param2 param3#PRDSEDID Function #PRLOEDID Function#PRBAEDID Function #PRWEBADD Function #PREDIDST Function#RSTIP Function #SIPADD Function#SIPADD param1 param2 param3 param4 #SNETMASK param1 param2 param3 param4 #SNETMASK Function#SGATEWAY Function #SGATEWAY param1 param2 param3 param4#SPORT param1 #ACTIVEBOLO Function #FADEFAULT Function#LOCKPOWER param1 #LOCKPOWER Function#MASKOUT Function #MASKOUT param1 param2#RMTIRADD param1 #RMTIRADD Function#STBYMODE Function #STBYMODE param1Command Commands Command DescriptionParam1 param2 Param1Syntax Parameters None View Matrix Status IP ControlCopy Edid Edid Lock State Manage EdidManage Edid Set Input to Default Edid Manage Edid Copy Edid Manage Edid Edid Lock State Masking IP Configuration Power Management Backup / RestoreFirmware Update Firmware Update Procedure========================================================= Programming Completed Successfully Waiting for the file to be sent ... press ‘a’ to abortRack Mount Safety Information Specifications Product Registration WarrantyLicensing Page Rev A6 Nordhoff St., Chatsworth CA