Gefen GEF-DVIKVM-848DL user manual #PRDSEDID Function, #PRLOEDID Function, #PRBAEDID Function

Page 24

RS-232 SERIAL CONTROL

#PRDSEDID Function

The #PRDSEDID function reads the downstream EDID and sends it to the serial port.

Syntax:

#PRDSEDID param1

Parameters:

 

 

param1

A downstream monitor

[1 - 8]

#PRLOEDID Function

The #PRLOEDID function reads the local EDID of a specified input and spools it to the serial port.

Syntax:

#PRLOEDID param1

Parameters:

 

 

param1

A specified Input

[1 - 8]

#PRBAEDID Function

The #PRBAEDID function reads the EDID file from the specified bank and sends to serial port.

Syntax:

#PRBAEDID param1

Parameters:

 

 

param1

Input

[1 - 5]

21

Image 24
Contents 8x8 DVI KVM Dual Link Matrix Asking for Assistance Technical SupportTechnical Support Hours Write ToContents Introduction GefenPROGefenPRO 8x8 DVI KVM Dual Link Matrix How It WorksOperation Notes Features FeaturesPackage Includes Panel Layout Front PanelPanel Descriptions Control ButtonsBack Panel 1110 1 2 3 Back Panel RS-232 Serial PortConnecting the 8X8 DVI KVM Dual Link Matrix How to Connect the GefenPRO 8x8 DVI KVM Dual Link MatrixHow to Operate the GefenPRO 8x8 DVI KVM Dual Link Matrix Displaying the Bootloader Version Front Panel DisplayMain Display Displaying the Firmware VersionDisplaying the Routing Status Routing SourcesRemote Control Unit Monitor and Source Selection Buttons 1IR Remote Installation Installing the RMT-16IR BatteryEmpty Battery Slot IR Remote Configuration Setting the IR Remote Control ChannelUsing the IR Remote Control Unit IR Remote Control Key MappingEDID. What is it and what is it used for? Edid ManagementRS-232 Serial Control 3 2 3 4RS-232 Features Functions Syntax #EDIDDSTOLO Function #EDIDDSTOLO param1 param2 param3...param9 #EDIDDSTOBA Function #EDIDDSTOBA param1 param2#EDIDBATOLO Function #EDIDBATOLO param1 param2 param3...param9#EDIDDETOLO Function #EDIDDETOLO param1 param2 param3...param9#LOCKEDID Function #LOCKEDID param1#LOEDIDTOLO Function #LOEDIDTOLO param1 param2 param3#PRDSEDID Function #PRLOEDID Function#PRBAEDID Function #PREDIDST Function #PRWEBADD Function#RSTIP Function #SIPADD Function#SIPADD param1 param2 param3 param4 #SNETMASK Function #SNETMASK param1 param2 param3 param4#SGATEWAY Function #SGATEWAY param1 param2 param3 param4#SPORT param1 #FADEFAULT Function #ACTIVEBOLO Function#LOCKPOWER Function #LOCKPOWER param1#MASKOUT Function #MASKOUT param1 param2#RMTIRADD Function #RMTIRADD param1#STBYMODE Function #STBYMODE param1Commands Command Description CommandParam1 param2 Param1Syntax Parameters None IP Control View Matrix StatusManage Edid Copy Edid Edid Lock StateManage Edid Set Input to Default Edid Manage Edid Copy Edid Manage Edid Edid Lock State Masking IP Configuration Backup / Restore Power ManagementFirmware Update Firmware Update Procedure========================================================= Waiting for the file to be sent ... press ‘a’ to abort Programming Completed SuccessfullyRack Mount Safety Information Specifications Warranty Product RegistrationLicensing Page Rev A6 Nordhoff St., Chatsworth CA