Gefen GEF-DVIKVM-848DL #RMTIRADD Function, #RMTIRADD param1, #STBYMODE Function, #STBYMODE param1

Page 31

RS-232 SERIAL CONTROL

#RMTIRADD Function

The #RMTIRADD function set the remote IR channel.

Syntax:

#RMTIRADD param1

Parameters:
param1	IR channel	[0 - 3]

#STBYMODE Function

The #STBYMODE function disables / enables standby power mode.

Syntax:

#STBYMODE param1

Parameters:
param1	Disable / Enable	[0 - 1]

	Value	Meaning
	0	Disable Standby Mode
	1	Enable Standby Mode

28

Image 31

Contents 8x8 DVI KVM Dual Link Matrix Write To Asking for AssistanceTechnical Support Technical Support HoursContents How It Works IntroductionGefenPRO GefenPRO 8x8 DVI KVM Dual Link MatrixOperation Notes Features FeaturesPackage Includes Front Panel Panel LayoutControl Buttons Panel DescriptionsBack Panel 1110 1 2 3 RS-232 Serial Port Back PanelHow to Connect the GefenPRO 8x8 DVI KVM Dual Link Matrix Connecting the 8X8 DVI KVM Dual Link MatrixHow to Operate the GefenPRO 8x8 DVI KVM Dual Link Matrix Displaying the Firmware Version Displaying the Bootloader VersionFront Panel Display Main DisplayRouting Sources Displaying the Routing StatusMonitor and Source Selection Buttons 1 Remote Control UnitInstalling the RMT-16IR Battery IR Remote InstallationEmpty Battery Slot Setting the IR Remote Control Channel IR Remote ConfigurationIR Remote Control Key Mapping Using the IR Remote Control UnitEdid Management EDID. What is it and what is it used for?3 2 3 4 RS-232 Serial ControlFunctions Syntax RS-232 Features#EDIDDSTOBA param1 param2 #EDIDDSTOLO Function#EDIDDSTOLO param1 param2 param3...param9 #EDIDDSTOBA Function#EDIDDETOLO param1 param2 param3...param9 #EDIDBATOLO Function#EDIDBATOLO param1 param2 param3...param9 #EDIDDETOLO Function#LOEDIDTOLO param1 param2 param3 #LOCKEDID Function#LOCKEDID param1 #LOEDIDTOLO Function#PRLOEDID Function #PRDSEDID Function#PRBAEDID Function #PRWEBADD Function #PREDIDST Function#SIPADD Function #RSTIP Function#SIPADD param1 param2 param3 param4 #SGATEWAY param1 param2 param3 param4 #SNETMASK Function#SNETMASK param1 param2 param3 param4 #SGATEWAY Function#SPORT param1 #ACTIVEBOLO Function #FADEFAULT Function#MASKOUT param1 param2 #LOCKPOWER Function#LOCKPOWER param1 #MASKOUT Function#STBYMODE param1 #RMTIRADD Function#RMTIRADD param1 #STBYMODE FunctionParam1 Commands Command DescriptionCommand Param1 param2Syntax Parameters None View Matrix Status IP ControlCopy Edid Edid Lock State Manage EdidManage Edid Set Input to Default Edid Manage Edid Copy Edid Manage Edid Edid Lock State Masking IP Conﬁguration Power Management Backup / RestoreFirmware Update Procedure Firmware Update========================================================= Programming Completed Successfully Waiting for the ﬁle to be sent ... press ‘a’ to abortRack Mount Safety Information Specifications Product Registration WarrantyLicensing Page Rev A6 Nordhoff St., Chatsworth CA