Gefen GEF-DVIKVM-848DL user manual Panel Descriptions, Control Buttons

Page 8

PANEL DESCRIPTIONS

Front Panel

1 Control Buttons

These buttons are used to navigate the LCD menu system. See pages 9 and 10 for more information.

◄- Left

► - Right

Select - Select

2Cancel Button

This button is used to cancel a routing change in progress.

3IR Window

Receives signals from the IR Remote Control unit.

4Power Indicator

This LED indicator will glow bright red when the power is turned on.

5Power Switch

Turn the power on or off using this switch.

6LCD Display

Displays the current routing status of the Matrix and is also used to manage source routing.

5

Image 8

Contents 8x8 DVI KVM Dual Link Matrix Asking for Assistance Technical SupportTechnical Support Hours Write ToContents Introduction GefenPROGefenPRO 8x8 DVI KVM Dual Link Matrix How It Works Operation Notes Package Includes FeaturesFeatures Panel Layout Front PanelPanel Descriptions Control ButtonsBack Panel 1110 1 2 3 Back Panel RS-232 Serial PortHow to Operate the GefenPRO 8x8 DVI KVM Dual Link Matrix Connecting the 8X8 DVI KVM Dual Link MatrixHow to Connect the GefenPRO 8x8 DVI KVM Dual Link Matrix Displaying the Bootloader Version Front Panel DisplayMain Display Displaying the Firmware VersionDisplaying the Routing Status Routing SourcesRemote Control Unit Monitor and Source Selection Buttons 1Empty Battery Slot IR Remote InstallationInstalling the RMT-16IR Battery IR Remote Configuration Setting the IR Remote Control ChannelUsing the IR Remote Control Unit IR Remote Control Key MappingEDID. What is it and what is it used for? Edid ManagementRS-232 Serial Control 3 2 3 4RS-232 Features Functions Syntax#EDIDDSTOLO Function #EDIDDSTOLO param1 param2 param3...param9#EDIDDSTOBA Function #EDIDDSTOBA param1 param2#EDIDBATOLO Function #EDIDBATOLO param1 param2 param3...param9#EDIDDETOLO Function #EDIDDETOLO param1 param2 param3...param9#LOCKEDID Function #LOCKEDID param1#LOEDIDTOLO Function #LOEDIDTOLO param1 param2 param3#PRBAEDID Function #PRDSEDID Function#PRLOEDID Function #PREDIDST Function #PRWEBADD Function#SIPADD param1 param2 param3 param4 #RSTIP Function#SIPADD Function #SNETMASK Function #SNETMASK param1 param2 param3 param4#SGATEWAY Function #SGATEWAY param1 param2 param3 param4#SPORT param1 #FADEFAULT Function #ACTIVEBOLO Function#LOCKPOWER Function #LOCKPOWER param1#MASKOUT Function #MASKOUT param1 param2#RMTIRADD Function #RMTIRADD param1#STBYMODE Function #STBYMODE param1Commands Command Description CommandParam1 param2 Param1Syntax Parameters None IP Control View Matrix StatusManage Edid Copy Edid Edid Lock StateManage Edid Set Input to Default Edid Manage Edid Copy Edid Manage Edid Edid Lock State Masking IP Conﬁguration Backup / Restore Power Management========================================================= Firmware UpdateFirmware Update Procedure Waiting for the ﬁle to be sent ... press ‘a’ to abort Programming Completed SuccessfullyRack Mount Safety Information Specifications Warranty Product RegistrationLicensing Page Rev A6 Nordhoff St., Chatsworth CA