IP CONTROL
Backup / Restore
The Backup/Restore page is used to backup and restore complete setup configurations. This feature will be implemented in a future release.
Power Management
The Power Management page is used to set optional +5V power on an input to power specific optional devices. The current status of this feature for each input can be viewed on this page. To set this feature for each input follow the steps below.
1.Select the +5V option, either “On” or “Off” for each desired input.
2.Click on the “Update” button to initiate the change(s).
Note: After this command is complete the user will be returned to the Main Page.
This page will automatically refresh every minute, however, at anytime the “Refresh” button can be pressed to refresh the status of the matrix.
38