Gefen GEF-DVIKVM-848DL user manual Rack Mount Safety Information

Page 44

RACK MOUNT SAFETY INFORMATION

a.Maximum recommended ambient temperature: 45 ˚C (104 ˚F).

b.Increase the air ﬂow as needed to maintain the recommended temperature inside the rack.

c.Do not exceed maximum weight loads for the rack. Install heavier equipment in the lower part of the rack to maintain stability.

d.Connect a bonding wire between an approved safety ground and the grounding screw on the chassis.

41

Image 44

Contents 8x8 DVI KVM Dual Link Matrix Asking for Assistance Technical SupportTechnical Support Hours Write ToContents Introduction GefenPROGefenPRO 8x8 DVI KVM Dual Link Matrix How It WorksOperation Notes Package Includes FeaturesFeatures Panel Layout Front PanelPanel Descriptions Control ButtonsBack Panel 1110 1 2 3 Back Panel RS-232 Serial PortHow to Operate the GefenPRO 8x8 DVI KVM Dual Link Matrix Connecting the 8X8 DVI KVM Dual Link MatrixHow to Connect the GefenPRO 8x8 DVI KVM Dual Link Matrix Displaying the Bootloader Version Front Panel DisplayMain Display Displaying the Firmware VersionDisplaying the Routing Status Routing SourcesRemote Control Unit Monitor and Source Selection Buttons 1Empty Battery Slot IR Remote InstallationInstalling the RMT-16IR Battery IR Remote Configuration Setting the IR Remote Control ChannelUsing the IR Remote Control Unit IR Remote Control Key MappingEDID. What is it and what is it used for? Edid ManagementRS-232 Serial Control 3 2 3 4RS-232 Features Functions Syntax#EDIDDSTOLO Function #EDIDDSTOLO param1 param2 param3...param9#EDIDDSTOBA Function #EDIDDSTOBA param1 param2#EDIDBATOLO Function #EDIDBATOLO param1 param2 param3...param9#EDIDDETOLO Function #EDIDDETOLO param1 param2 param3...param9#LOCKEDID Function #LOCKEDID param1#LOEDIDTOLO Function #LOEDIDTOLO param1 param2 param3#PRBAEDID Function #PRDSEDID Function#PRLOEDID Function #PREDIDST Function #PRWEBADD Function#SIPADD param1 param2 param3 param4 #RSTIP Function#SIPADD Function #SNETMASK Function #SNETMASK param1 param2 param3 param4#SGATEWAY Function #SGATEWAY param1 param2 param3 param4#SPORT param1 #FADEFAULT Function #ACTIVEBOLO Function#LOCKPOWER Function #LOCKPOWER param1#MASKOUT Function #MASKOUT param1 param2#RMTIRADD Function #RMTIRADD param1#STBYMODE Function #STBYMODE param1Commands Command Description CommandParam1 param2 Param1Syntax Parameters None IP Control View Matrix StatusManage Edid Copy Edid Edid Lock StateManage Edid Set Input to Default Edid Manage Edid Copy Edid Manage Edid Edid Lock State Masking IP Conﬁguration Backup / Restore Power Management========================================================= Firmware UpdateFirmware Update Procedure Waiting for the ﬁle to be sent ... press ‘a’ to abort Programming Completed SuccessfullyRack Mount Safety Information Specifications Warranty Product RegistrationLicensing Page Rev A6 Nordhoff St., Chatsworth CA