Fortinet 5050-R manual USER3

FortiGate-5050 shelf alarm panel FortiGate-5050 chassis

Figure 4: FortiGate-5050 shelf alarm panel front panel

Minor Alarm (MIN) (Amber)

Major Alarm (MAJ) (Red)

Critical Alarm (CRT) (Red)

5050SAP

SERIAL

1

Retention

Screw

SERIAL 1 (Primary

Shelf Manager)

User 3 Alarm (Amber)

User 2 Alarm (Amber)

User 1 Alarm (Amber)

							SERIAL
							2
ALARM
				Alarm
	Telco		Alarm	LED Reset			Retention
		Interface		Button			Screw
					SERIAL	2 (Secondary
					Shelf Manager)

Table 3: FortiGate-5050 shelf alarm panel LEDs
LED	State		Description
CRT	Off		Normal operation.
(critical)
	Red		Indicates a critical alarm.
	Blinking		Alarm cutoff (ACO) activated by pressing the alarm LED reset button.
	Red
MAJ (major)	Off		Normal operation.
	Red		Indicates a major alarm.
	Blinking		Alarm cutoff (ACO) activated by pressing the alarm LED reset button.
	Red
MIN (minor)	Off		Normal operation.
	Amber		Indicates a minor alarm.
	Blinking		Alarm cutoff (ACO) activated by pressing the alarm LED reset button.
	Amber
USER3	Off		Normal operation
USER2
	Amber		Indicates a user-definable alarm.
USER1
	Blinking		Alarm cutoff (ACO) activated by pressing the alarm LED reset button.
	Amber
Table 4: FortiGate-5050 shelf alarm panel connectors
Connector	Type	Speed		Protocol	Description
SERIAL 1	RJ-45	9600 bps,		RS-232	Serial connection to the primary shelf manager
		8/N/1		serial	command line interface.
SERIAL 2	RJ-45	9600 bps,		RS-232	Serial connection to the secondary shelf
		8/N/1		serial	manager command line interface.
ALARM	micro	N/A		Telco	The external dry relay Telco alarm interface
	DB-15			Form-c	(48VDC) provides Telco form-c relay
	male				connections for minor, major and critical power
					faults. The cable required to connect to the
					alarm interface is not supplied by Fortinet.

Figure 5 shows the connections between the primary and secondary shelf managers and the shelf alarm panel.

FortiGate-5050-R Chassis Guide

1001-30000-87717-20090108http://docs.fortinet.com/ • Feedback