Fortinet 5050-R manual FortiGate-5050 front panel, Power LED

FortiGate-5050 front panel FortiGate-5050 chassis

FortiGate-5050 front panel

Figure 1 shows the front of a FortiGate-5050 chassis. Two FortiSwitch-5003 boards are installed in slots 1 and 2. Three FortiGate-5001SX boards are installed in slots 3, 4, and 5.

The FortiGate-5050 primary and secondary Shelf Managers and the Shelf Alarm Panel (SAP) are also visible. The factory installed shelf alarm panel displays alarms, provides a telco alarm interface, and also provides serial connections to the shelf managers. The factory installed shelf managers provide power distribution, cooling, alarms, and shelf status for the FortiGate-5050 chassis. For more information about these components, see “FortiGate-5050 shelf alarm panel” on page 9 and “FortiGate-5050 shelf managers” on page 8.

Figure 1: FortiGate-5050 front panel with FortiGate-5001SX and FortiSwitch-5003 boards installed

FortiGate-5001SX

boards

slots 3, 4,

and 5

FortiSwitch-5003

boards

slots 1 and 2

5	CONSOLE	USB	1	2	3	4	5	6	7	8
	PWR ACC									STA	IPM

4	CONSOLE	USB	1	2	3	4	5	6	7	8
	PWR ACC									STA	IPM

3		CONSOLE	USB		1	2	3			4				5			6			7		8	Hot-swappable
	PWR ACC																					STA IPM
	MANAGEMENT	TE H O		SR 2 3 2	Z R E 0	Z R E 1	Z R E 2											CLK OK	EXT INT FLT FLT	HOT SWAP			cooling fan tray
2			SYSTEM CONSOLE					E2 E1	14 15	12 13	10 11	8 9	6 7	4 5	2 3	0 1	ZRE				RESET	LEDMODE	POWER
																							Power LED

1 MANAGEMENT ET H O SYSTEM CONSOLE RS 2 3 2 RZ E 0 RZ E 1 RZ E 2 E2 E1 14 15 12 13 10 11 8 9 6 7 4 5 2 3 0 1 ZRE CLK OK EXT INT FLT FLT SWAPHOT RESET LED MODE

SMC

2

5000SM

ETH1	link/Act
ETH0	10/100
	link/Act
	10/100

Service

ETH0

STATUS

Hot Swap

5050SAP

5000SM

ETH0

Service

STATUS

Hot Swap

SMC

ETH0 ETH1

10/100

RESET

SERIAL

ALARM

SERIAL

link/Act

RESET

10/100

1

1

2

link/Act

Secondary		ESD socket
	Shelf Alarm	Primary
Shelf Manager	Panel (SAP)	Shelf Manager
(SMC 2)		(SMC 1)

Also visible on the front of the FortiGate-5050:

•The location of the hot swappable FortiGate-5050 cooling fan tray behind panel.

•Power LED.

•ESD socket, used for connecting an ESD wrist or ankle band when working with the chassis.

Caution: Do not operate the FortiGate-5050 chassis with open slots on the front panel. For optimum cooling performance and safety, the slots must contain a FortiGate-5000 series board or an air baffle slot filler. As well the removable power supply panel must be installed over the power connectors on the back of the chassis.

FortiGate-5050-R Chassis Guide

601-30000-87717-20090108http://docs.fortinet.com/ • Feedback