Configuring the WAN Ports
4.Enter encapsulation ppp to select PPP encoding.
5.Enter no shutdown to keep the BRI interface enabled.
BRI Leased Frame Relay
1.Enter interface bri 0:<1
2.Enter encapsulation
3.Enter no shutdown to keep the BRI interface enabled.
4.Enter
5.Enter interface bri 0:<1
6.Enter ip address <xxx.xxx.xxx.xxx>/24 to set an IP address for the BRI interface.
7.Enter
8.Enter no shutdown to keep the BRI
BRI Switched Line
1.Enter interface bri 0 to acquire Interface mode and select the BRI port.
2.Enter isdn
3.Enter isdn spid1 <SPID><LDR> for the SPID (ISDN service) and LDR (local directory) telephone numbers.
4.Enter isdn spid2 <SPID><LDR> for a second SPID as needed.
5.Enter no shutdown to keep the BRI interface enabled.
6.Enter dialer
7.Enter exit to quit BRI Interface mode.
8.Enter interface dialer
9.Enter ip address <xxx.xxx.xxx.xxx/24 to set an IP address for the Dialer port.
10.Enter encapsulation ppp to select PPP encoding.
11.Enter dialer string <phone number> class <Map Class name> to specify the destination number and associated Map Class.
12.Enter any additional dialer strings as instructed above.
13.Enter dialer pool
14.Enter show interface to verify your ISDN and dialer configuration.
15.Enter no shutdown to keep the Dialer interface enabled.
Remember to save your configuration after all edits.