Enterasys Networks XSR-3150 manual Dynamic Host Configuration Protocol Dhcp

System Description

•Periodic Keep-Alive messages to learn of connection problems

•Multi-protocol interconnect over Frame Relay - RFC-2427

•RFC-2390 Frame Relay Inverse ARP to discover IP address of remote peer when used in multi- point mode and responds to incoming Inverse ARP requests independent of P2P or MP2P

•Multiple logical interfaces over the same physical Frame Relay port: sub-interfaces

•Quality of Service: standard FIFO queuing, or IP QoS on DLCIs.

•Max PDU size of 1600 bytes

•Traffic shaping

•Frame Relay Fragmentation Implementation Agreement (FRF.12)

•Data Communications Equipment (DCE) support

•Frame Relay over ISDN

•Remote Auto Install over Frame Relay

Dynamic Host Configuration Protocol (DHCP)

•Temporary or permanent network (IP) address allocation to clients

•Network configuration parameter assignment to clients

•Persistent storage/database of network values for network clients - Bindings Database

•Persistent storage of network client lease states kept across reboot

•Persistent and user-controllable conflict avoidance to prevent duplicate IP address including configurable ping checking

•Visibility of DHCP network activity and leases through operator reports statistics and logs

•DHCP Client

Integrated Services Digital Network (ISDN) - BRI/PRI

•Circuit Mode Data (CMD): Channels (DS0s) are switched by the CO to the destination user for the duration of the call

•Outgoing calls supported for Backup, DoD/BoD

•Incoming calls routed to the correct protocol stack based on called number/sub-address and calling number/sub-address

•Permanent B-channel support, i.e. 64 or 128 kbps lease line. Each BRI port can be set for CMD or Leased-Line mode of operation

•BRI supported switches: ETSI

•BRI: TEI auto-negotiated

•Q.921/Q.931 (Layer 2/Layer 3) configuration is set automatically by selection of switch type

•PRI supported switches: ETSI, NI, DMS100, NTT

•PRI: Handling restart and maintenance modes automatically set

•PRI: Fixed TEI to 0

•ISDN switched and Leased Line connections

XSR Getting Started Guide 1-7