Russound CAV6.6-S2 instruction manual Sample System Configuration, Six Zones and Six Sources

SAMPLE SYSTEM CONFIGURATION 1

Six Zones and Six Sources

The configuration shows how the CAV6.6 distrib- utes audio/video throughout the house using six UNO System Keypads and six audio/video source components.

Source Components

The configuration allows for any zone to select any one of the six source inputs.

Keypads

The configuration uses a single UNO-S2 Keypad per zone. Each keypad is connected to the CAV6.6’s Keypad Port using the RJ-45 T568A wiring configuration. Each keypad port number corresponds with the zone number. This gives complete control of the zone to one keypad.

The UNO-S2 Keypad can control the source equipment, volume for the zone, source selection, tone control, mute, and other functions. Programmable functions are also possible. The IR receiver on the keypad also allows the UNO-LRC1 and other remotes to control not only the zone but also the source equipment.

Components List:

1 - CAV6.6 Controller

6 - UNO-S2 Keypads

3 - pair Advantage Iso-Mount™ Speakers

3 - pair Advantage Twist & Tilt™ Speakers

6 - 845.1 Micro Emitters

IR Remote control through Keypad

To control the source components via IR from the UNO-S2 Keypad, an IR emitter must be con- nected from the source component to the CAV6.6. The emitter is shown connected from the IR receiver on the source component to the source component’s IR emitter output port on the rear on the CAV6.6. This type of configura- tion allows independent control over more than one identical source component. The IR from the remote will be routed to the selected source. When using the UNO-LRC1 remote, simply select “UNO” at the top of the remote, select source 1-6 and operate the source.

Speakers

Connect the speakers to the amplified CAV6.6 zones 1 through 6 using a “Home Run” from the individual amplified speaker outputs to the speakers. Use the detachable modular snap speaker connectors which are color coded and labeled for easy installation. For most installations, 16 gauge 4-conductor wire is recommended.

84