INSTALLER
INSTALLATION MENU
Macro Editor (cont’d)
66
i. LEARNED SRC – Select the learned source bank to be assigned to the source
(LnSrc) component. Procedure advances to KEY FUNCTION (step 6)
b. Selected: Unassigned Selected command and subsequent commands are cleared.
(Unasg) Procedure advances to COMMAND NUM (step 3)
c. Selected: Default Default selects the same device type and device code previously
(Deflt) setup in BASIC SETUP. Procedure advances to KEY FUNCTION
(step 6)
d. Selected: Macro:
i. MACRO - A macro can “call” another macro if a sequence of more than 10
(Macro) commands is needed.
ii. MACRO ID – Enter the macro ID number. Menu advances to COMMAND NUM
(MacID) (step 3)
e. Selected: Delay Enter a 1- to 60-second delay time to postpone delivery of the
(Delay) next command in the macro. Procedure advances to COMMAND
NUM (step 3)
f. All Other Selections: Procedure advances to DEVICE CODE (step 6)
5. DEVICE CODE – Source component code for IR control.
(DevCd)
6. KEY FUNCTION – Select a function (Play, etc.).
(KeyFn)
SYSTEM INFO (SInfo)
System Info allows the installer to view the controller’s manufacturing build properties.
See Installation Menu on Page 55 and System Info - Flow Chart on page 77
#CONTROLLERS (#Ctls) BUILD TIME (BTime) BUILD DATE (Bdate) VERSION (Ver)
1. #CONTROLLERS - Displays the number of CAV6.6 controllers in the system.
(#Ctls)
2. BUILD TIME - Displays the Software Build Time of the controller.
(BTime)
3. BUILD DATE - Displays the Software Build Date of the controller.
(BDate)
4. VERSION - Displays the software version of the CAV6.6.
(Ver)