INSTALLER

UNO-S2 KEYPAD-INSTALLATION

Keypad Location

The best infrared remote performance is achieved with the keypad away from any direct sunlight, plasma TV, and low voltage lighting controls. Also consider convenience when choosing a location.

Choose a place that is easily seen from the posi- tion where a person is most likely to be located.

Check whether or not you can route the wire to the location you have chosen.

Keypad Installation

To install a double-gang keypad, you will need to use a UL/CSA approved plastic double-gang electrical box (Do not use metal boxes).

Route CAT-5 wire to the junction box from the CAV6.6.

Use the supplied 110 punchdown tool to con- nect each wire to its corresponding color labeled on the punchdown terminal.

Ensure jumper settings on keypads are in the run positions.

Mount the keypad in the electrical box and attach the cover plate. Repeat the steps until all keypads are installed.

Plastic Double-Gang

Electrical Box

UNO-S2

Back Plate

Screw

Screwless

Cover Plate

Screw

26

Page 26
Image 26
Russound CAV6.6-S2 instruction manual UNO-S2 KEYPAD-INSTALLATION, Keypad Location