INSTALLER
PROGRAMMING
System Programming Overview (cont’d)
2. Number of Sources (# of Sources/SOURCE SETUP) (Page 61)
This procedure sets the number of sources used in the system. This prevents the user from selecting a source input that is not used.
3. Basic Setup (SOURCE SETUP) (Page 55)
This procedure is mandatory to set up each source for keypad source control and is the cornerstone of the programming process.
4. Learn IR (Page 64)
This procedure is used when the
5. Macro Editor (Page 65)
This procedure compiles multiple IR codes to be initiated by a single button press. One macro can have up to 10 commands, including other macros, and up to 132 macros can be entered.
6. Source Volume Trim (SOURCE SETUP) (Page 58)
This procedure matches audio output signals for all sources for seamless switching.
7. Numeric IR (SOURCE SETUP) (Page 58)
This procedure sets up control of a source that supports direct numeric commands.
8. Key Configuration (SOURCE SETUP) (Page 56)
This procedure customizes individual key functions on a
9. Power Management (Page 62)
This function incorporates IR macro commands to automatically control the power state of the sources when the system is in use or when a home theater is sharing sources. This advanced feature uses audio signal monitoring to confirm source power, which provides the user with
10. Zone Volume Trim (ZONE SETUP) (Page 61)
This procedure limits the maximum volume allowed in a zone, regardless of keypad volume adjust- ment.
11.System On Enable (SYSON ENABLE/ZONE SETUP) (Page 61) This feature allows a zone to join or opt out of an “all on” command.
12.Party Enable (ZONE SETUP) (Page 61)
This feature allows a zone to join or opt out of Party Mode participation.
13. Master Enable (ZONE SETUP) (Page 61)
This feature allows a zone the option of becoming a Master keypad in Party Mode.
14. Page Enable (ZONE SETUP) (Page 61)
This feature allows a zone to hear or to block paging.
15. Page Volume (ZONE SETUP) (Page 61)
50
