Russound CAV6.6-S2 instruction manual Installer

INSTALLER

COMPONENT GUIDE

CAV6.6 Controller-Rear Panel

10SPEAKER OUTPUTS - Connect 8 Ohm speakers for each zone by using detachable color-coded modular snap connectors

11AUDIO/VIDEO INPUTS - Six sets of Audio/Video Line Level input connections for CAV6.6 source components

12ACC IR OUTPUT - ACC IR Output jack will pass all IR signals from all keypads

13PAGE LINE LEVEL AUDIO GAIN CONTROL - Adjusts the Line Level Audio Page Input

14PAGE A/V INPUTS - RCA jacks allow for one Audio/Video Page Input. Signal sensing is used on Page Audio In to initiate a page

15PAGE 12VDC TRIGGER OUT - Page Trigger Out supplies 12VDC whenever 12VDC is applied to the Page 12VDC Trigger In

16PAGE 12VDC TRIGGER IN - Applying 12VDC to the Page 12VDC Trigger In jack will activate Audio/Video Page for assigned CAV6.6 Zones and initiate a page (overrides signal sense)

17HOME THEATER 12VDC TRIGGER IN - 12VDC input jack notifies the CAV6.6 that additional A/V components are active, e.g., home theater equipment

1812VDC TRIGGER OUT - 12VDC 50ma Trigger Out turns on when any zone is on

19A-BUS READY SUB-ZONES - A-BUS Amplified Control Modules and Hubs can be added for additional sub-zones of audio (Zones 1 to 4 only)

20R-NET LINK IN AND LINK OUT - Links multiple CAV6.6’s, also links future Russound components that are R-NET compatible

21RS-232 INTERFACE - The RS-232 Interface on the rear and on the front, allows the zones to be controlled by PC or other devices that have an RS-232 Interface. The RS-232 Interface also allows for software updates and programming

23