Bootrom Monitor Mode Commands
Set working directory to flash:
Using default Bootrom password. The system is not secure!!!
Use “bp” to change password
ffc
This command formats the CompactFlash card.
ng
This command retrieves a file over the network using a remote IP address/file path.
np
This command modifies network parameters. You are prompted to enter data by the following script. While most of the options are
•When set to no, the Autoboot option places the prompt in Bootrom mode when you boot or power up the XSR.
•When set to yes, the default Quickboot action of delaying five seconds at startup for you to optionally enter
•The default hostname (local target name),
Enter ‘.’ = clear a field;
Local IP address (192.168.1.1) | : |
Gateway IP address () | : |
Remote Host IP address (192.168.1.10) : | : |
Remote file path (c:\) | |
Use TFTP (no) | : |
Ftp userid (anonymous) | : |
Ftp password () | : |
Local target name (robo1) | : |
Autoboot (yes) | : |
Quick boot (no) | : |
Permanently save the network parameters? (y/n)
ns
This command saves a file over the network using a remote IP address/file path.
XSR Getting Started Guide