XSR Rebooting Characteristics
Create the
XSR(config)#interface vpn1
XSR(config)#description “VPN Virtual Interface Int0”
XSR(config)#ip address 10.10.10.1/24
XSR(config)#ip rip send version 2
XSR(config)#ip rip receive version 2
XSR(config)#ip
Enable RIP routing on all networks except the public interface:
XSR(config)#router rip
XSR(config)#network 172.16.10.0
XSR(config)#network 10.0.0.0
XSR(config)#no
Finally, attach the crypto map statement to the public interface:
XSR(config)#interface gigabitethernet 2
XSR#copy
XSR Rebooting Characteristics
When the XSR reboots, it conforms to the behavior described in this section. The output displayed at the CLI describes router initialization.
Initialization Output
The XSR displays the following output when it initializes (cold reboot):
Copyright 2003 Enterasys Networks Inc.
HW Version:
CPU: Broadcom BCM1250 Rev 2
VxWorks version: VxWorks5.4.2
Bootrom version: 1.5
Creation date: Aug 26 2003, 13:23:16
Warm Start : from cli
Testing Bootrom Integrity << PASSED >>
Verifying flash:xsr3000.fls file ...
Router S/W size=11989192 sum=0xedd1 compressed_size=4109639 entry=0x80020000 Diagnostics size=1459880 sum=0x8154 compressed_size=614417 entry=0x80020000 RouterCpu1 S/W size=1520104 sum=0x4a2c compressed_size=652528 entry=0x82020000
XSR Getting Started Guide