Version 1.1 |
WPA Authentication Mode: Select the Personal
WPA/WPA2: Select TKIP or AES as the cipher suite.
Click on the Apply Changes button to confirm the changes. This device will automatically restart once these changes have been applied.
WPA / WPA2 RADIUS Authentication
Encryption: Select WPA or WPA2 from the
WPA Authentication Mode: Select the Enterprise (RADIUS) radio button.
WPA/WPA2: Select TKIP or AES as the cipher suite.
RADIUS Port: Enter the port number of the RADIUS server. The default is usually 1812.
RADIUS IP Address: Enter the IP address of the RADIUS server.
RADIUS Password: Enter the shared password of the RADIUS server.
Click on the Apply Changes button to confirm the changes. This device will automatically restart once these changes have been applied.
Wireless Distribution System
•Wireless Distribution System uses wireless media to communicate with other APs, like the Ethernet does. To do this, you must set these APs in the same channel and set MAC address of other APs which you want to communicate with in the table and then enable the WDS.
40