EnGenius Technologies ECB-1220R user manual Upgrade Firmware

Page 52

ECB-1220R 11b/g Wireless Client Bridge/AP/Router/Repeater

Version 1.1

ƒSince the log is not dynamic, you must click on the Refresh button for the most recent events, or click on the Clear button to clear the log.

Upgrade Firmware

ƒClick on the Upgrade Firmware link under the Management menu. This page is used to upgrade the firmware on the device. Make sure that downloaded the appropriate firmware from your vendor.

ƒClick on the Browse button and then select the appropriate firmware and then click on the Upload button.

Note: The upgrade process may take about 1 minute to complete. Do not power off the device during this process as it may crash the device and make it unusable. The device will restart automatically once the upgrade is complete.

Save / Reload Settings, Reset to Default

ƒClick on the Save / Reload Setting link under the Management menu. This option is used to save the current settings of the device in a file on your local disk or load settings on to the device from a local disk. This feature is very handy for administrators who have several devices that need to be configured with the same settings.

ƒThis page also allows you to reset the device to its factory default settings.

52

Image 52
Contents ECB-1220R Table of Contents Ireless S ITE S Urvey Revision History Features & Benefits IntroductionRouter/AP Mode Package Contents Unit DescriptionSystem Requirements ApplicationsNetwork Configuration Wireless extensions to Ethernet networksWired LAN backup Ad-hoc peer-to-peer ModeInfrastructure Mode Hardware Installation IP Address ConfigurationPage Bridge/Bridge Router to Access Point Access Point to Bridge/Bridge RouterAccess Point/Router Mode Config Loggingƒ Wireless Configuration ƒ Systemƒ TCP/IP Configuration ManagementManagement Router mode Operation Mode Page Status Statistics Dynamic DNS Router mode Time Zone Setting Router mode Denial of Service DoS Router mode LogUpgrade Firmware Save / Reload Settings, Reset to Default Password TCP/IP SettingsSnmp Settings LAN InterfaceWlan Interface Router mode Dhcp ClientRouter mode PPPoE Pptp Point-to-Point Tunneling Protocol Router mode Page Wireless Basic Settings Infrastructure, Adhoc Advanced Settings Security Encryption Disabled WEP 64-bit / 128-bit WPA / WPA2 Passphrase WPA / WPA2 Radius Authentication Wireless Distribution SystemFirewall Page MAC Address Filter Port ForwardingWeb site Filter DMZ Client Bridge/Router Mode Config Page System Operation Mode Status Statistics Upgrade Firmware Password TCP/IP Settings Static IP Address Dhcp ClientDhcp Server Snmp Settings Client Bridge Router Wlan InterfacePPPoE Page Basic Settings Advanced Settings Page Security WEP 64-bit / 128-bit WPA / WPA2 / WPA2 Mixed Passphrase Wireless Site Survey Federal Communication Commission Interference Statement FCC Radiation Exposure StatementAppendix B IC Statement IC Radiation Exposure Statement