EnGenius Technologies ECB-1220R user manual Hardware Installation, IP Address Configuration

Page 11

ECB-1220R 11b/g Wireless Client Bridge/AP/Router/Repeater

Version 1.1

2 Understanding the Hardware

Hardware Installation

1Place the unit in an appropriate place after conducting a site survey.

2Plug one end of the Ethernet cable into the RJ-45 port of the device and another end into your PC/Notebook.

3Insert the DC-inlet of the power adapter into the port labeled “DC-IN” and the other end into the power socket on the wall.

This diagram depicts the hardware configuration

PC

Ethernet

Bridge/AP

AC/DC cable

Power Outlet

IP Address Configuration

This device can be configured as a Client Bridge or Access Point. The default IP address of the device is 192.168.1.1 or 192.168.1.2. In order to log into this device, you must first configure the TCP/IP settings of your PC/Notebook.

1.In the control panel, double click Network Connections and then double click on the connection of your Network Interface Card (NIC). You will then see the following screen.

11

Image 11

Contents ECB-1220R Table of Contents Ireless S ITE S Urvey Revision History Introduction Features & BenefitsRouter/AP Mode Unit Description Package ContentsApplications System RequirementsAd-hoc peer-to-peer Mode Network ConfigurationWireless extensions to Ethernet networks Wired LAN backupInfrastructure Mode IP Address Configuration Hardware InstallationPage Access Point to Bridge/Bridge Router Bridge/Bridge Router to Access PointLogging Access Point/Router Mode Configƒ System ƒ Wireless ConfigurationManagement ƒ TCP/IP ConfigurationManagement Router mode Operation Mode Page Status Statistics Dynamic DNS Router mode Time Zone Setting Router mode Log Denial of Service DoS Router modeUpgrade Firmware Save / Reload Settings, Reset to Default TCP/IP Settings PasswordLAN Interface Snmp SettingsDhcp Client Wlan Interface Router modeRouter mode PPPoE Pptp Point-to-Point Tunneling Protocol Router mode Page Wireless Basic Settings Infrastructure, Adhoc Advanced Settings Security Encryption Disabled WEP 64-bit / 128-bit WPA / WPA2 Passphrase Wireless Distribution System WPA / WPA2 Radius AuthenticationFirewall Page Port Forwarding MAC Address FilterWeb site Filter DMZ Client Bridge/Router Mode Config Page System Operation Mode Status Statistics Upgrade Firmware Password TCP/IP Settings Dhcp Client Static IP AddressDhcp Server Snmp Settings Wlan Interface Client Bridge RouterPPPoE Page Basic Settings Advanced Settings Page Security WEP 64-bit / 128-bit WPA / WPA2 / WPA2 Mixed Passphrase Wireless Site Survey FCC Radiation Exposure Statement Federal Communication Commission Interference StatementIC Radiation Exposure Statement Appendix B IC Statement