EnGenius Technologies ECB-1220R user manual Client Bridge/Router Mode Config

Page 46

ECB-1220R 11b/g Wireless Client Bridge/AP/Router/Repeater

Version 1.1

4 Client Bridge/Router Mode – Config

Logging In

To configure the Access Point through the web-browser, enter the IP address of the Bridge (default: 192.168.1.1) into the address bar of the web-browser and press Enter.

Make sure that the Access Point and your computers are on the same subnet. Refer to Chapter 2 in order to configure the IP address of your computer.

Log in User name：admin; Password：admin

After logging in you will graphical user interface (GUI) of the Access Point. The

navigation drop-down menu on left is divided into three main sections:

4.Management: This includes operation mode, status, statistics, logs, upgrade firmware, save/reload settings, and password.

5.TCP/IP Settings: This includes the configuration of the LAN port and settings for the LAN IP, subnet mask, DHCP client, spanning tree and MAC cloning.

6.Wireless: This includes the basic, advanced, security and site-survey settings for the wireless interface.

The Access Point status page is also displayed once you have logged in. This includes details about the system, wireless, and TCP/IP configuration.

46

Image 46

Contents ECB-1220R Table of Contents Ireless S ITE S Urvey Revision History Features & Benefits IntroductionRouter/AP Mode Package Contents Unit DescriptionSystem Requirements ApplicationsWired LAN backup Network ConfigurationWireless extensions to Ethernet networks Ad-hoc peer-to-peer ModeInfrastructure Mode Hardware Installation IP Address ConfigurationPage Bridge/Bridge Router to Access Point Access Point to Bridge/Bridge RouterAccess Point/Router Mode Config Loggingƒ Wireless Configuration ƒ Systemƒ TCP/IP Configuration ManagementManagement Router mode Operation Mode Page Status Statistics Dynamic DNS Router mode Time Zone Setting Router mode Denial of Service DoS Router mode LogUpgrade Firmware Save / Reload Settings, Reset to Default Password TCP/IP SettingsSnmp Settings LAN InterfaceWlan Interface Router mode Dhcp ClientRouter mode PPPoE Pptp Point-to-Point Tunneling Protocol Router mode Page Wireless Basic Settings Infrastructure, Adhoc Advanced Settings Security Encryption Disabled WEP 64-bit / 128-bit WPA / WPA2 Passphrase WPA / WPA2 Radius Authentication Wireless Distribution SystemFirewall Page MAC Address Filter Port ForwardingWeb site Filter DMZ Client Bridge/Router Mode Config Page System Operation Mode Status Statistics Upgrade Firmware Password TCP/IP Settings Static IP Address Dhcp ClientDhcp Server Snmp Settings Client Bridge Router Wlan InterfacePPPoE Page Basic Settings Advanced Settings Page Security WEP 64-bit / 128-bit WPA / WPA2 / WPA2 Mixed Passphrase Wireless Site Survey Federal Communication Commission Interference Statement FCC Radiation Exposure StatementAppendix B IC Statement IC Radiation Exposure Statement