EnGenius Technologies ECB-1220R user manual Password, TCP/IP Settings

Page 26

ECB-1220R 11b/g Wireless Client Bridge/AP/Router/Repeater

Version 1.1

Click on the Save button to save the current settings to a file on the local disk.

Click on the Browse button to select the settings file and then click on the Upload button to load the previously saved settings.

Click on the Reset button to reset the device to its factory default settings. Click Restart to reboot the device.

Password

Click on the Password link under the Management menu. This option allows you to create a user name and password for the device. By default, this device is configured without a user name and password. For security reasons it is highly recommended that you create a user name and password.

Enter a user name into the first field.

Enter a password into the New Password field and then re-type the password into the Confirmed Password field. Then click on the Apply Changes button.

By clicking on the Reset button, the user name and password fields will become blank indicating that the username and password has been disabled.

TCP/IP Settings

Click on the TCP/IP Settings link on the navigation drop-down menu. You will then see the LAN Interface and SNMP option. The options are described in detail below.

26

Image 26

Contents ECB-1220R Table of Contents Ireless S ITE S Urvey Revision History Features & Benefits IntroductionRouter/AP Mode Package Contents Unit DescriptionSystem Requirements ApplicationsWired LAN backup Network ConfigurationWireless extensions to Ethernet networks Ad-hoc peer-to-peer ModeInfrastructure Mode Hardware Installation IP Address ConfigurationPage Bridge/Bridge Router to Access Point Access Point to Bridge/Bridge RouterAccess Point/Router Mode Config Loggingƒ Wireless Configuration ƒ Systemƒ TCP/IP Configuration ManagementManagement Router mode Operation Mode Page Status Statistics Dynamic DNS Router mode Time Zone Setting Router mode Denial of Service DoS Router mode LogUpgrade Firmware Save / Reload Settings, Reset to Default Password TCP/IP SettingsSnmp Settings LAN InterfaceWlan Interface Router mode Dhcp ClientRouter mode PPPoE Pptp Point-to-Point Tunneling Protocol Router mode Page Wireless Basic Settings Infrastructure, Adhoc Advanced Settings Security Encryption Disabled WEP 64-bit / 128-bit WPA / WPA2 Passphrase WPA / WPA2 Radius Authentication Wireless Distribution SystemFirewall Page MAC Address Filter Port ForwardingWeb site Filter DMZ Client Bridge/Router Mode Config Page System Operation Mode Status Statistics Upgrade Firmware Password TCP/IP Settings Static IP Address Dhcp ClientDhcp Server Snmp Settings Client Bridge Router Wlan InterfacePPPoE Page Basic Settings Advanced Settings Page Security WEP 64-bit / 128-bit WPA / WPA2 / WPA2 Mixed Passphrase Wireless Site Survey Federal Communication Commission Interference Statement FCC Radiation Exposure StatementAppendix B IC Statement IC Radiation Exposure Statement