EnGenius Technologies ECB-1220R user manual Bridge/Bridge Router to Access Point

Page 13

ECB-1220R 11b/g Wireless Client Bridge/AP/Router/Repeater

Version 1.1

3 Client Bridge/Router & Router/ AP

This device can be configured as a Bridge or Access Point. The default IP address of the device is 192.168.1.1 in Client Bridge/Client Router mode. The default IP address of the device is 192.168.1.2 in AP/Router mode. This chapter will describe the steps to switch from Bridge to Access Point and Access Point to Bridge.

Bridge/Bridge Router to Access Point

1Enter the default IP address (192.168.1.2) of the bridge into the address bar of the web-browser.

2By default, a user name and password has not been configured. If you have configured a user name and password, please enter them into the field to continue

3Once you have logged in, click on the Operation Mode link under the Management menu.

4Since this device is currently in Bridge mode, the Bridge radio button will be selected by default.

5Select the AP radio button to and then click on the Apply Change to switch the operation mode to Access Point.

6Wait for about 1 minute and the device will automatically restart into Access Point mode.

Access Point to Bridge/Bridge Router

1Enter the default IP address (192.168.1.1) of the bridge into the address bar of the web-browser.

2By default, a user name and password has not been configured. If you have configured a user name and password, please enter them into the field to continue

3Once you have logged in, click on the Operation Mode link under the Management menu.

13

Page 12 Page 14
Image 13
Page 12 Page 14
Contents ECB-1220R Table of Contents Ireless S ITE S Urvey Revision History Introduction Features & BenefitsRouter/AP Mode Unit Description Package ContentsApplications System RequirementsWireless extensions to Ethernet networks Network ConfigurationWired LAN backup Ad-hoc peer-to-peer ModeInfrastructure Mode IP Address Configuration Hardware InstallationPage Access Point to Bridge/Bridge Router Bridge/Bridge Router to Access PointLogging Access Point/Router Mode Configƒ System ƒ Wireless ConfigurationManagement ƒ TCP/IP ConfigurationManagement Router mode Operation Mode Page Status Statistics Dynamic DNS Router mode Time Zone Setting Router mode Log Denial of Service DoS Router modeUpgrade Firmware Save / Reload Settings, Reset to Default TCP/IP Settings PasswordLAN Interface Snmp SettingsDhcp Client Wlan Interface Router modeRouter mode PPPoE Pptp Point-to-Point Tunneling Protocol Router mode Page Wireless Basic Settings Infrastructure, Adhoc Advanced Settings Security Encryption Disabled WEP 64-bit / 128-bit WPA / WPA2 Passphrase Wireless Distribution System WPA / WPA2 Radius AuthenticationFirewall Page Port Forwarding MAC Address FilterWeb site Filter DMZ Client Bridge/Router Mode Config Page System Operation Mode Status Statistics Upgrade Firmware Password TCP/IP Settings Dhcp Client Static IP AddressDhcp Server Snmp Settings Wlan Interface Client Bridge RouterPPPoE Page Basic Settings Advanced Settings Page Security WEP 64-bit / 128-bit WPA / WPA2 / WPA2 Mixed Passphrase Wireless Site Survey FCC Radiation Exposure Statement Federal Communication Commission Interference StatementIC Radiation Exposure Statement Appendix B IC Statement
Top Page Image Contents