EnGenius Technologies ECB-1220R user manual Access Point/Router Mode Config, Logging

Page 14

ECB-1220R 11b/g Wireless Client Bridge/AP/Router/Repeater

Version 1.1

4Since this device is currently in Access Point mode, the AP radio button will be selected by default.

5Select the Bridge or Bridge Router radio button to and then click on the Apply Change to switch the operation mode to Bridge.

6Wait for about 1 minute and the device will automatically restart into Bridge mode.

4 Access Point/Router Mode – Config

Logging In

To configure the AP through the web-browser, type IP address (default: 192.168.1.2) into the address bar of the web-browser and press Enter.

Make sure that the ECB-1220R and your computers are on the same subnet. Refer to Chapter 2 in order to configure the IP address of your computer.

Username：admin; Password：admin

14

Image 14

Contents ECB-1220R Table of Contents Ireless S ITE S Urvey Revision History Features & Benefits IntroductionRouter/AP Mode Package Contents Unit DescriptionSystem Requirements ApplicationsWired LAN backup Network ConfigurationWireless extensions to Ethernet networks Ad-hoc peer-to-peer ModeInfrastructure Mode Hardware Installation IP Address ConfigurationPage Bridge/Bridge Router to Access Point Access Point to Bridge/Bridge RouterAccess Point/Router Mode Config Loggingƒ Wireless Configuration ƒ Systemƒ TCP/IP Configuration ManagementManagement Router mode Operation Mode Page Status Statistics Dynamic DNS Router mode Time Zone Setting Router mode Denial of Service DoS Router mode LogUpgrade Firmware Save / Reload Settings, Reset to Default Password TCP/IP SettingsSnmp Settings LAN InterfaceWlan Interface Router mode Dhcp ClientRouter mode PPPoE Pptp Point-to-Point Tunneling Protocol Router mode Page Wireless Basic Settings Infrastructure, Adhoc Advanced Settings Security Encryption Disabled WEP 64-bit / 128-bit WPA / WPA2 Passphrase WPA / WPA2 Radius Authentication Wireless Distribution SystemFirewall Page MAC Address Filter Port ForwardingWeb site Filter DMZ Client Bridge/Router Mode Config Page System Operation Mode Status Statistics Upgrade Firmware Password TCP/IP Settings Static IP Address Dhcp ClientDhcp Server Snmp Settings Client Bridge Router Wlan InterfacePPPoE Page Basic Settings Advanced Settings Page Security WEP 64-bit / 128-bit WPA / WPA2 / WPA2 Mixed Passphrase Wireless Site Survey Federal Communication Commission Interference Statement FCC Radiation Exposure StatementAppendix B IC Statement IC Radiation Exposure Statement