EnGenius Technologies EOA7530 IP Address, IP Subnet Mask, Default Gateway, 802.1d Spanning Tree

Page 35

In the next screen, manually enter static IP addresses for the two devices. This mode requires the EOA7530’s DHCP server to be turned off, as noted in the table below. This is the default setting. If you change it, please turn off DHCP Server for WDS Bridge Mode.

IP Address

Specify the IP address of the EOA7530 LAN port.

IP Subnet Mask

Specify the subnet mask of the EOA7530 LAN port.

 

 

Default Gateway

Specify the default gateway of the EOA7530 LAN port.

 

 

802.1d Spanning Tree

Enable or disable Spanning Tree. It is disabled by default

 

 

DHCP Server

 

 

 

DHCP Server

Disable the DHCP server to prevent automatic allocation of IP addresses to LAN

 

client PCs. Then configure your PC’s local IP address to access the Web Configurator.

 

 

Lease Time

Specify the amount of time a DHCP network user is allowed connection to the

 

EOA7530 with their current dynamic IP address.

 

 

Start IP

Specify the starting IP address range for the pool of allocated for private IP

 

addresses. The starting IP address must be on the same subnet as the ending IP

 

address; that is the first three octets specified here must be the same as the first

 

three octets in End IP.

 

 

End IP

Specify the ending IP address range for the pool of allocated for private IP addresses.

 

The ending IP address must be on the same subnet as the starting IP address; that is

 

the first three octets specified here must be the same as the first three octets in

 

Start IP.

 

 

Domain Name

Specify the domain name of the EOA7530’s private LAN settings.

 

 

Apply / Cancel

Click Apply to apply the changes or Cancel to discard your changes and return to the

 

previous settings.

 

 

34

Page 34 Page 36
Image 35
Page 34 Page 36
Contents EOA7530 Table of Contents LAN Setup Page Product Overview FeaturesBenefits System Requirements Package ContentsBottom View Hardware OverviewBack Panel Installing the EOA7530 LED Configuring Your Computer for TCP/IP Configuring Microsoft Windows Page Configuring Microsoft Windows Vista Page Configuring Microsoft Windows XP Configuring Microsoft Windows Page Configuring an Apple Macintosh Computer Logging in to the Web Configurator Introducing the Web ConfiguratorBest Practices Selecting Operating Modes Wireless ConfigurationSelecting Dual Mode for 2.4 GHz and 5 GHz Networks Page Access Point Mode Dual Mode Wireless SettingsEssid Apply / Cancel Access Point Mode 5 GHz Access Point Mode 2.4 GHz Client Bridge Mode/Client Router Mode Dual Mode Preferred Bssid Client Bridge Mode/Client Router Mode 5 GHz5G Wireless Setting 4G Wireless SettingClient Bridge Mode/Client Router Mode 2.4 GHz Please Choose WDS Bridge ModeOperation Mode 5G Apply / Cancel 802.1d Spanning Tree Default GatewayIP Address IP Subnet MaskData rates Bssid Wlan MACAddress ChannelsBssid 5.3 Site SurveySsid AP Scan List 5 GHz / 2.4 GHz WMM Wireless Security SettingsWEP Access Point WEP Client Bridge / Client Router WPA Type WPA pre‐shared Key Access PointApply Pre‐shared Key WPA pre‐shared Key Client Bridge / Client RouterPre‐shared Key Type Radius Access Point Mode Only Radius Server Port Radius Server PasswordRadius Server IP Address Advanced Settings Access Point Wireless Advanced SettingsDistance Advanced Settings Client Bridge / Client RouterTx Power Preamble TypeWireless Access Control List Delete All MAC Address FilteringDelete Selected LAN Settings LAN SetupCurrent Static Dhcp Table Enable Static Dhcp IPDhcp Info Snmp Disable Snmp SettingsSnmp Enable Static IP Internet SettingsDhcp Dynamic IP MTU PPPoE Point‐to‐Point Protocol over EthernetStatic IP Address WAN Interface Type Pptp Point‐to‐Point Tunneling ProtocolDynamic IP Address WAN Interface Type Enable L2TP pass through Service IP AddressEnable Pptp pass through Enable IPSec pass throughStatus Information StatusSystem Log Wireless Client ListInternet Status Time Zone Settings Management SettingsPassword Settings Diagnosis Save/Reload Settings Remote ControlUpgrade Firmware Restart Restore to FactoryDefault Settings Backup Settings Restore SettingsAccess Point Mode + Client Bridge Mode Network Configuration ExampleClient Bridge Client Router ModeLeft pane, go to Management Operation Mode EOA7530 Operating Modes Access Point ModeClient Bridge Mode Sample Access Point Application Real‐World Configurations‐ Click Apply Sample Access Point and Client Bridge Application Page Page Radio Frequency Specifications Hardware SpecificationsRadio 2 WLAN2 Software FeaturesEnvironmental and Physical ManagementFactory Default in the Management menu Problem Solving Question AnswerContacting Technical Support Question AnswerChap ESS ID Quality of Service QoS Media Access Control MAC AddressPower Over Ethernet PoE Protected Extensible Authentication Protocol PeapWi‐Fi Protected Access WPA Weighted Fair Queuing WFQWired Equivalent Privacy WEP Wireless Local‐Area Network WlanWPA2 Wireless Distribution System WDSFCC Radiation Exposure Statement Federal Communication Commission Interference StatementImportant Note

EOA7530 specifications

EnGenius Technologies EOA7530 is a robust, high-performance outdoor access point designed to provide strong, reliable wireless connectivity in various environments. One of its standout features is its dual-band technology, which allows it to operate on both 2.4 GHz and 5 GHz frequencies. This capability enables the EOA7530 to offer a more flexible and efficient networking experience, allowing users to balance load across bands and reduce interference.

Equipped with advanced 802.11ac Wave 2 technology, the EOA7530 supports Multi-User MIMO (MU-MIMO) and beamforming, which enhance performance by allowing multiple clients to connect simultaneously without degrading speed. This is particularly beneficial in high-density areas or environments where many users are vying for network resources.

The EOA7530 is also protected by an IP55-rated enclosure, making it ideal for outdoor installations in challenging weather conditions. This rugged design ensures that the device can withstand dust, water, and even extreme temperatures, delivering uninterrupted service in various climates. Additionally, it is equipped with Power over Ethernet (PoE) capabilities, which simplifies installation by allowing the device to receive both data and power through a single Ethernet cable.

For those looking to extend their coverage, the EOA7530 supports seamless roaming and can be easily integrated into larger EnGenius networks. Users can manage the access point via an intuitive web interface, or utilize the EnGenius Cloud for centralized management of multiple devices, enhancing scalability and ease of use.

Furthermore, the device offers several security features to protect the network against unauthorized access, including WPA3 encryption, guest network capability, and VLAN support. This makes the EOA7530 an excellent choice for businesses looking to enhance security while maintaining user access.

In summary, the EnGenius Technologies EOA7530 is a versatile outdoor access point that combines durability, advanced wireless technology, and robust security features. It is suitable for a variety of applications, from educational campuses to outdoor events, making it an ideal solution for those needing reliable and efficient wireless networking in outdoor environments.
Top Page Image Contents