EnGenius Technologies EOA7530 manual Dhcp Info, Enable Static Dhcp IP, Current Static Dhcp Table

Page 50

 

address; that is the first three octets specified here must be the same as the first

 

three octets in End IP.

 

 

End IP

Specify the ending IP address range for the pool of allocated for private IP addresses.

 

The ending IP address must be on the same subnet as the starting IP address; that is

 

the first three octets specified here must be the same as the first three octets in

 

Start IP.

 

 

Domain Name

Specify the domain name of the EOA7530’s private LAN settings.

 

 

Apply / Cancel

Click Apply to apply the changes or Cancel to discard your changes and return to the

 

previous settings.

 

 

6.2 DHCP Info

Click on DHCP Info under the TCP/IP section to view clients associated with the EOA7530 via DHCP. You can also assign an IP address for certain MAC addresses. The IP Address, MAC Address, and Expiration Time for each IP address are displayed. Click the Refresh button to update the client list.

Enable Static DHCP IP

Check Enable Static DHCP IP.

IP Address

Specify the IP address of the MAC address you want to add.

 

 

MAC Address

Specify the MAC address.

 

 

Add

Click Add to add the MAC address.

 

 

Reset

Click Reset to discard your changes.

 

 

Current Static DHCP Table

View your selections.

 

 

49

Page 49 Page 51
Image 50
Page 49 Page 51
Contents EOA7530 Table of Contents LAN Setup Page Features Product OverviewBenefits Package Contents System RequirementsHardware Overview Bottom ViewBack Panel Installing the EOA7530 LED Configuring Your Computer for TCP/IP Configuring Microsoft Windows Page Configuring Microsoft Windows Vista Page Configuring Microsoft Windows XP Configuring Microsoft Windows Page Configuring an Apple Macintosh Computer Introducing the Web Configurator Logging in to the Web ConfiguratorBest Practices Wireless Configuration Selecting Operating ModesSelecting Dual Mode for 2.4 GHz and 5 GHz Networks Page Wireless Settings Access Point Mode Dual ModeEssid Apply / Cancel Access Point Mode 5 GHz Access Point Mode 2.4 GHz Client Bridge Mode/Client Router Mode Dual Mode 4G Wireless Setting Client Bridge Mode/Client Router Mode 5 GHz5G Wireless Setting Preferred BssidClient Bridge Mode/Client Router Mode 2.4 GHz Please Choose WDS Bridge ModeOperation Mode 5G Apply / Cancel IP Subnet Mask Default GatewayIP Address 802.1d Spanning TreeChannels Bssid Wlan MACAddress Data ratesBssid 5.3 Site SurveySsid AP Scan List 5 GHz / 2.4 GHz WMM Wireless Security SettingsWEP Access Point WEP Client Bridge / Client Router WPA Type WPA pre‐shared Key Access PointApply Pre‐shared Key WPA pre‐shared Key Client Bridge / Client RouterPre‐shared Key Type Radius Access Point Mode Only Radius Server Port Radius Server PasswordRadius Server IP Address Wireless Advanced Settings Advanced Settings Access PointPreamble Type Advanced Settings Client Bridge / Client RouterTx Power DistanceWireless Access Control List Delete All MAC Address FilteringDelete Selected LAN Setup LAN SettingsCurrent Static Dhcp Table Enable Static Dhcp IPDhcp Info Snmp Disable Snmp SettingsSnmp Enable Static IP Internet SettingsDhcp Dynamic IP PPPoE Point‐to‐Point Protocol over Ethernet MTUStatic IP Address WAN Interface Type Pptp Point‐to‐Point Tunneling ProtocolDynamic IP Address WAN Interface Type Enable IPSec pass through Service IP AddressEnable Pptp pass through Enable L2TP pass throughInformation Status StatusWireless Client List System LogInternet Status Time Zone Settings Management SettingsPassword Settings Diagnosis Save/Reload Settings Remote ControlUpgrade Firmware Restore Settings Restore to FactoryDefault Settings Backup Settings RestartNetwork Configuration Example Access Point Mode + Client Bridge ModeClient Router Mode Client BridgeLeft pane, go to Management Operation Mode Access Point Mode EOA7530 Operating ModesClient Bridge Mode Real‐World Configurations Sample Access Point Application‐ Click Apply Sample Access Point and Client Bridge Application Page Page Hardware Specifications Radio Frequency SpecificationsSoftware Features Radio 2 WLAN2Management Environmental and PhysicalProblem Solving Question Answer Factory Default in the Management menuQuestion Answer Contacting Technical SupportChap ESS ID Protected Extensible Authentication Protocol Peap Media Access Control MAC AddressPower Over Ethernet PoE Quality of Service QoSWireless Local‐Area Network Wlan Weighted Fair Queuing WFQWired Equivalent Privacy WEP Wi‐Fi Protected Access WPAWireless Distribution System WDS WPA2FCC Radiation Exposure Statement Federal Communication Commission Interference StatementImportant Note

EOA7530 specifications

EnGenius Technologies EOA7530 is a robust, high-performance outdoor access point designed to provide strong, reliable wireless connectivity in various environments. One of its standout features is its dual-band technology, which allows it to operate on both 2.4 GHz and 5 GHz frequencies. This capability enables the EOA7530 to offer a more flexible and efficient networking experience, allowing users to balance load across bands and reduce interference.

Equipped with advanced 802.11ac Wave 2 technology, the EOA7530 supports Multi-User MIMO (MU-MIMO) and beamforming, which enhance performance by allowing multiple clients to connect simultaneously without degrading speed. This is particularly beneficial in high-density areas or environments where many users are vying for network resources.

The EOA7530 is also protected by an IP55-rated enclosure, making it ideal for outdoor installations in challenging weather conditions. This rugged design ensures that the device can withstand dust, water, and even extreme temperatures, delivering uninterrupted service in various climates. Additionally, it is equipped with Power over Ethernet (PoE) capabilities, which simplifies installation by allowing the device to receive both data and power through a single Ethernet cable.

For those looking to extend their coverage, the EOA7530 supports seamless roaming and can be easily integrated into larger EnGenius networks. Users can manage the access point via an intuitive web interface, or utilize the EnGenius Cloud for centralized management of multiple devices, enhancing scalability and ease of use.

Furthermore, the device offers several security features to protect the network against unauthorized access, including WPA3 encryption, guest network capability, and VLAN support. This makes the EOA7530 an excellent choice for businesses looking to enhance security while maintaining user access.

In summary, the EnGenius Technologies EOA7530 is a versatile outdoor access point that combines durability, advanced wireless technology, and robust security features. It is suitable for a variety of applications, from educational campuses to outdoor events, making it an ideal solution for those needing reliable and efficient wireless networking in outdoor environments.
Top Page Image Contents