Login | Specify the user name supplied by your ISP. | |
Password | Specify the password supplied by your ISP. | |
|
| |
Service IP Address | Specify the service IP address supplied by your ISP. | |
|
| |
Connection ID | Specify the connection ID supplied by your ISP. | |
|
| |
MTU | Specify the Maximum Transmit Unit size. It is recommended you accept the default | |
| setting of Auto. Otherwise, packets will be fragmented downstream if the MTU is set | |
| too high or too low, which impacts network performance. In extreme cases, an MTU | |
| setting that is too low can prevent the EOA7530 from establishing some connections. | |
|
| |
Type | Select a connection type from the drop‐down menu. Choices are: | |
| • | Keep Connection = device connects to the Internet automatically. |
| • | Automatic Connection = device connects to the Internet automatically when the |
|
| traffic goes through the Internet and disconnects after a period of idle time |
|
| elapses. |
| • | Manual Connection = device connects to the Internet manually. |
|
| |
Idle Timeout | If the EOA7530 is configured for Automatic Connection, specify the maximum | |
| amount of time the device can remain idle before disconnecting. | |
|
| |
Enable PPTP pass through | Check PPTP pass through on VPN Connection. Otherwise, the EOA7530 will not be | |
on VPN Connection | able to connect to the Internet via PPTP. | |
|
| |
Enable IPSec pass through | Check IPSec pass through on VPN Connection. Otherwise, the EOA7530 will not be | |
on VPN Connection | able to transmit data using the IPSec protocol. | |
|
| |
Enable L2TP pass through | Check L2TP pass through on VPN Connection. Otherwise, the EOA7530 will not be | |
on VPN Connection | able to connect to the Internet using L2TP. | |
|
| |
Apply / Cancel | Click Apply to apply the changes or Cancel to discard your changes and return to the | |
| previous settings. | |
|
|
|
|
| 54 |