EnGenius Technologies EOA7530 manual Left pane, go to Management Operation Mode

Page 65

10.3 WDS Bridge Mode

Step1

Log in to the web‐based configuration interface using the default IP address

 

192.168.1.2.

 

 

Step2

In the left pane, go to Management > Operation Mode.

 

 

Step3

Under Please choose the Operation Mode 5G, click WDS Bridge Mode.

 

 

Step4

Click Apply to save your changes.

 

 

Step5

Enter the Device A LAN IP address (for example, 192.168.10.100).

 

 

Step6

Enter the Device B LAN IP address (for example, 192.168.10.101).

 

 

Step7

In the left pane, go to Management > Status.

 

 

Step8

Under 5GHz WDS, find the 5GHz BSSID (MAC address) of the devices you want to

bridge together.

 

 

 

Step9

In the left pane, go to 5GHz Wireless > WDS Link.

 

 

Step10

In the Channel field, select the desired 5 GHz channel/frequency.

 

 

Step11

In the WDA MAC 0 field, enter the 5GHz BSSID (MAC address) of the WDS link

partner.

 

 

 

Step12

Click Apply to save your changes.

 

 

Step13

Repeat steps 2 through 12 for both WDS bridges, so that Device A has the 5GHz

 

BSSID (MAC address) of Device B and Device B has the 5GHz BSSID (MAC address) of

 

Device A.

 

 

Step14

Optional: Go to 5GHz Wireless > WDS Link and click Security to set up wireless

 

security for the WDS bridge mode connection. (WEP is the only encryption method

 

supported for the WDS bridge mode connection.)

 

 

64

Page 64 Page 66
Image 65
Page 64 Page 66
Contents EOA7530 Table of Contents LAN Setup Page Product Overview FeaturesBenefits System Requirements Package ContentsBottom View Hardware OverviewBack Panel Installing the EOA7530 LED Configuring Your Computer for TCP/IP Configuring Microsoft Windows Page Configuring Microsoft Windows Vista Page Configuring Microsoft Windows XP Configuring Microsoft Windows Page Configuring an Apple Macintosh Computer Logging in to the Web Configurator Introducing the Web ConfiguratorBest Practices Selecting Operating Modes Wireless ConfigurationSelecting Dual Mode for 2.4 GHz and 5 GHz Networks Page Access Point Mode Dual Mode Wireless SettingsEssid Apply / Cancel Access Point Mode 5 GHz Access Point Mode 2.4 GHz Client Bridge Mode/Client Router Mode Dual Mode 5G Wireless Setting Client Bridge Mode/Client Router Mode 5 GHz4G Wireless Setting Preferred BssidClient Bridge Mode/Client Router Mode 2.4 GHz Please Choose WDS Bridge ModeOperation Mode 5G Apply / Cancel IP Address Default GatewayIP Subnet Mask 802.1d Spanning TreeAddress Bssid Wlan MACChannels Data ratesBssid 5.3 Site SurveySsid AP Scan List 5 GHz / 2.4 GHz WMM Wireless Security SettingsWEP Access Point WEP Client Bridge / Client Router WPA Type WPA pre‐shared Key Access PointApply Pre‐shared Key WPA pre‐shared Key Client Bridge / Client RouterPre‐shared Key Type Radius Access Point Mode Only Radius Server Port Radius Server PasswordRadius Server IP Address Advanced Settings Access Point Wireless Advanced SettingsTx Power Advanced Settings Client Bridge / Client RouterPreamble Type DistanceWireless Access Control List Delete All MAC Address FilteringDelete Selected LAN Settings LAN SetupCurrent Static Dhcp Table Enable Static Dhcp IPDhcp Info Snmp Disable Snmp SettingsSnmp Enable Static IP Internet SettingsDhcp Dynamic IP MTU PPPoE Point‐to‐Point Protocol over EthernetStatic IP Address WAN Interface Type Pptp Point‐to‐Point Tunneling ProtocolDynamic IP Address WAN Interface Type Enable Pptp pass through Service IP AddressEnable IPSec pass through Enable L2TP pass throughStatus Information StatusSystem Log Wireless Client ListInternet Status Time Zone Settings Management SettingsPassword Settings Diagnosis Save/Reload Settings Remote ControlUpgrade Firmware Default Settings Backup Settings Restore to FactoryRestore Settings RestartAccess Point Mode + Client Bridge Mode Network Configuration ExampleClient Bridge Client Router ModeLeft pane, go to Management Operation Mode EOA7530 Operating Modes Access Point ModeClient Bridge Mode Sample Access Point Application Real‐World Configurations‐ Click Apply Sample Access Point and Client Bridge Application Page Page Radio Frequency Specifications Hardware SpecificationsRadio 2 WLAN2 Software FeaturesEnvironmental and Physical ManagementFactory Default in the Management menu Problem Solving Question AnswerContacting Technical Support Question AnswerChap ESS ID Power Over Ethernet PoE Media Access Control MAC AddressProtected Extensible Authentication Protocol Peap Quality of Service QoSWired Equivalent Privacy WEP Weighted Fair Queuing WFQWireless Local‐Area Network Wlan Wi‐Fi Protected Access WPAWPA2 Wireless Distribution System WDSFCC Radiation Exposure Statement Federal Communication Commission Interference StatementImportant Note

EOA7530 specifications

EnGenius Technologies EOA7530 is a robust, high-performance outdoor access point designed to provide strong, reliable wireless connectivity in various environments. One of its standout features is its dual-band technology, which allows it to operate on both 2.4 GHz and 5 GHz frequencies. This capability enables the EOA7530 to offer a more flexible and efficient networking experience, allowing users to balance load across bands and reduce interference.

Equipped with advanced 802.11ac Wave 2 technology, the EOA7530 supports Multi-User MIMO (MU-MIMO) and beamforming, which enhance performance by allowing multiple clients to connect simultaneously without degrading speed. This is particularly beneficial in high-density areas or environments where many users are vying for network resources.

The EOA7530 is also protected by an IP55-rated enclosure, making it ideal for outdoor installations in challenging weather conditions. This rugged design ensures that the device can withstand dust, water, and even extreme temperatures, delivering uninterrupted service in various climates. Additionally, it is equipped with Power over Ethernet (PoE) capabilities, which simplifies installation by allowing the device to receive both data and power through a single Ethernet cable.

For those looking to extend their coverage, the EOA7530 supports seamless roaming and can be easily integrated into larger EnGenius networks. Users can manage the access point via an intuitive web interface, or utilize the EnGenius Cloud for centralized management of multiple devices, enhancing scalability and ease of use.

Furthermore, the device offers several security features to protect the network against unauthorized access, including WPA3 encryption, guest network capability, and VLAN support. This makes the EOA7530 an excellent choice for businesses looking to enhance security while maintaining user access.

In summary, the EnGenius Technologies EOA7530 is a versatile outdoor access point that combines durability, advanced wireless technology, and robust security features. It is suitable for a variety of applications, from educational campuses to outdoor events, making it an ideal solution for those needing reliable and efficient wireless networking in outdoor environments.
Top Page Image Contents