Chapter 10 Network Configuration Example
This chapter provides step‐by‐step descriptions for using the EOA7530’s three operating modes. The Access Point Mode’s default configuration allows the EOA7530 to act as a central unit of a WLAN or as a root device of a wired environment. Repeater mode and Mesh network mode need must also be configured (refer to the manuals for those devices).
10.1 Access Point Mode + Client Bridge Mode
Access Point
Step1 | Log in to the web‐based configuration interface using the default IP address |
| 192.168.1.2. |
|
|
Step2 | Select 802.11b/g mixed and/or 802.11a as your wireless mode. |
|
|
Step3 | Use AP Scan to scan channels in nearby area. |
|
|
Step4 | Select a channel with the least interference. |
|
|
Step5 | Specify the SSID for your broadcast SSID. Configure multiple SSIDs at the same time. |
|
|
Step6 | Verify the VLAN identifier to separate services among clients |
|
|
Step7 | Set up the authentication settings. |
|
|
Step8 | Click Apply to save all changes. |
Note: Dual mode uses the same SSID on 5 GHz and 2.4 GHz WLAN. For more advanced settings, see the previous
chapters.
62