EnGenius Technologies EOA7530 manual Client Router Mode, Client Bridge

Page 64

Client Bridge

Step1

Log in to the web‐based configuration interface using the default IP address

192.168.1.2.

 

 

 

Step2

Change the operating mode to Client Bridge.

 

 

Step3

Select 5G or 2.4G as your wireless mode.

 

 

Step4

Use the site survey to scan nearby Access Points and select the Access Point to which

you want to connect, or enter an SSID manually.

 

 

 

Step5

Select an authentication type and enter the appropriate password.

Note: the wireless silent IP address must be configured manually using the same subnet as the LAN or enable the EOA7530’s DHCP server to retrieve an IP address automatically.

10.2 Client Router Mode

See the last section for information about configuring the EOA7530 for Access Point Mode.

Step1

Log in to the web‐based configuration interface using default IP address 192.168.1.2.

 

 

Step2

Change the operating mode to Client Router.

 

 

Step3

Select 5G or 2.4G as your wireless mode.

 

 

Step4

Use the site survey to scan nearby Access Points and select the Access Point to which

 

you want to connect, or enter an SSID manually.

 

 

Step5

Select an authentication type and enter the appropriate password.

 

 

Step6

Select the appropriate type of Internet connection based on your ISP.

Note: For more information about Internet connection settings, see the Internet chapter.

63

Image 64
Contents EOA7530 Table of Contents LAN Setup Page Features Product OverviewBenefits Package Contents System RequirementsHardware Overview Bottom ViewBack Panel Installing the EOA7530 LED Configuring Your Computer for TCP/IP Configuring Microsoft Windows Page Configuring Microsoft Windows Vista Page Configuring Microsoft Windows XP Configuring Microsoft Windows Page Configuring an Apple Macintosh Computer Introducing the Web Configurator Logging in to the Web ConfiguratorBest Practices Wireless Configuration Selecting Operating ModesSelecting Dual Mode for 2.4 GHz and 5 GHz Networks Page Wireless Settings Access Point Mode Dual ModeEssid Apply / Cancel Access Point Mode 5 GHz Access Point Mode 2.4 GHz Client Bridge Mode/Client Router Mode Dual Mode Client Bridge Mode/Client Router Mode 5 GHz 5G Wireless Setting4G Wireless Setting Preferred BssidClient Bridge Mode/Client Router Mode 2.4 GHz Operation Mode 5G Apply / Cancel WDS Bridge ModePlease Choose Default Gateway IP AddressIP Subnet Mask 802.1d Spanning TreeBssid Wlan MAC AddressChannels Data ratesSsid 5.3 Site SurveyBssid AP Scan List 5 GHz / 2.4 GHz WEP Access Point Wireless Security SettingsWMM WEP Client Bridge / Client Router Apply WPA pre‐shared Key Access PointWPA Type Pre‐shared Key Type WPA pre‐shared Key Client Bridge / Client RouterPre‐shared Key Radius Access Point Mode Only Radius Server IP Address Radius Server PasswordRadius Server Port Wireless Advanced Settings Advanced Settings Access PointAdvanced Settings Client Bridge / Client Router Tx PowerPreamble Type DistanceWireless Access Control List Delete Selected MAC Address FilteringDelete All LAN Setup LAN SettingsDhcp Info Enable Static Dhcp IPCurrent Static Dhcp Table Snmp Enable Snmp SettingsSnmp Disable Dhcp Dynamic IP Internet SettingsStatic IP PPPoE Point‐to‐Point Protocol over Ethernet MTUDynamic IP Address WAN Interface Type Pptp Point‐to‐Point Tunneling ProtocolStatic IP Address WAN Interface Type Service IP Address Enable Pptp pass throughEnable IPSec pass through Enable L2TP pass throughInformation Status StatusWireless Client List System LogInternet Status Password Settings Management SettingsTime Zone Settings Diagnosis Upgrade Firmware Remote ControlSave/Reload Settings Restore to Factory Default Settings Backup SettingsRestore Settings RestartNetwork Configuration Example Access Point Mode + Client Bridge ModeClient Router Mode Client BridgeLeft pane, go to Management Operation Mode Access Point Mode EOA7530 Operating ModesClient Bridge Mode Real‐World Configurations Sample Access Point Application‐ Click Apply Sample Access Point and Client Bridge Application Page Page Hardware Specifications Radio Frequency SpecificationsSoftware Features Radio 2 WLAN2Management Environmental and PhysicalProblem Solving Question Answer Factory Default in the Management menuQuestion Answer Contacting Technical SupportChap ESS ID Media Access Control MAC Address Power Over Ethernet PoEProtected Extensible Authentication Protocol Peap Quality of Service QoSWeighted Fair Queuing WFQ Wired Equivalent Privacy WEPWireless Local‐Area Network Wlan Wi‐Fi Protected Access WPAWireless Distribution System WDS WPA2Important Note Federal Communication Commission Interference StatementFCC Radiation Exposure Statement

EOA7530 specifications

EnGenius Technologies EOA7530 is a robust, high-performance outdoor access point designed to provide strong, reliable wireless connectivity in various environments. One of its standout features is its dual-band technology, which allows it to operate on both 2.4 GHz and 5 GHz frequencies. This capability enables the EOA7530 to offer a more flexible and efficient networking experience, allowing users to balance load across bands and reduce interference.

Equipped with advanced 802.11ac Wave 2 technology, the EOA7530 supports Multi-User MIMO (MU-MIMO) and beamforming, which enhance performance by allowing multiple clients to connect simultaneously without degrading speed. This is particularly beneficial in high-density areas or environments where many users are vying for network resources.

The EOA7530 is also protected by an IP55-rated enclosure, making it ideal for outdoor installations in challenging weather conditions. This rugged design ensures that the device can withstand dust, water, and even extreme temperatures, delivering uninterrupted service in various climates. Additionally, it is equipped with Power over Ethernet (PoE) capabilities, which simplifies installation by allowing the device to receive both data and power through a single Ethernet cable.

For those looking to extend their coverage, the EOA7530 supports seamless roaming and can be easily integrated into larger EnGenius networks. Users can manage the access point via an intuitive web interface, or utilize the EnGenius Cloud for centralized management of multiple devices, enhancing scalability and ease of use.

Furthermore, the device offers several security features to protect the network against unauthorized access, including WPA3 encryption, guest network capability, and VLAN support. This makes the EOA7530 an excellent choice for businesses looking to enhance security while maintaining user access.

In summary, the EnGenius Technologies EOA7530 is a versatile outdoor access point that combines durability, advanced wireless technology, and robust security features. It is suitable for a variety of applications, from educational campuses to outdoor events, making it an ideal solution for those needing reliable and efficient wireless networking in outdoor environments.