Changing Vision VX Server Settings
To change the language for the | To configure network storage locations | ||
1. | Select Language | 1. | Select Network |
2. | Select On Screen User Interface | 2. | Select Network Storage |
3. | Select the desired language | 3. | Select up to 4 Escient storage devices (VS or VX Vision servers) to store all of |
|
|
| your imported media. Servers will be filled in order from top to bottom. |
To set the time zone
1.Select General
2.Select Time Zone
3.Select the time zone where your Vision is located. This is used to set the inter- nal clock and to periodically check for automatic updates during off hours.
To enable password security
1.Select Network
2.Select Security
3.Enter a numeric password that has no more than 8 digits. This password will be required to access the VX Server web interface the next time you access it.
To change the Ethernet network settings
1.Select Network
2.Select Ethernet
3.Select IP Address Type
4.DHCP (default) to automatically configure your network settings from your router or
5.Manual to manually configure the IP Address Settings: IP, gateway, subnet, and
DNS addresses for your network
To test the network settings
1.Select Network
2.Select Ethernet
3.Select Test Settings
To change the server name
1.Select Network
2.Select Server Name
3.Enter the name that you want to appear on your network when you access your Vision from your PC or another Escient product
Escient Vision
Version:
To view information about your Vision
1.Select Utilities
2.Select System Information
3.View information about your Vision system
To view information about the server’s hard drives
1.Select Utilities
2.Select Storage Information
3.View information about the server’s hard drives
To enable Escient Early Detection Monitoring
1.Select Utilities
2.Select Early Detection Monitoring
3.Ensure that Escient EDMS, Send Status, Send Warnings, and Send Critical are all set to ON
4.Select Enter Email Adrress...
5.Enter the desired Email Address and Select SAVE
6.Select Send Test Message... to test your settings
11