Recording pictures (advanced)
hBaby mode
This mode adjusts the exposure and tone to bring out the healthy colour of your baby’s skin. The flash will be weaker than normal if you choose to use it.
19
1 month 10days
10:00 20.DEC.2005
•You can also enter your baby’s age so that it appears when you are showing the picture later.
•You can also use the [LUMIX Simple Viewer] or [PHOTOfunSTUDIO] software on the included
BABY
WITH AGE
WITHOUT AGE
BIRTHDAY SET.
SELECT SET | MENU | MENU |
nAge display setting
•To show age, first enter the birthday, select [WITH AGE], and press q.
•To not show age, select [WITHOUT AGE], and press q.
nBirthday setting
1 Select [BIRTHDAY SET.] and press q.
2 [PLEASE SET THE BIRTHDAY OF THE BABY] appears on the display. Select year/month/day with w/q, then change the date with e/r.
3Press [MENU] to exit.
•If you select [WITH AGE] but you haven’t set the birthday, a message appears. Press [MENU] and follow steps 2 and 3 to enter the birthday.
•The ISO sensitivity is automatically adjusted to the optimal value.
•Whenever you turn the camera on in Baby mode or switch to Baby mode from any other scene mode, your baby’s age and the current date and time appear on the display for about 5 seconds.
•Actual age displays depend on the [LANGUAGE] setting.
•The display on the actual day of your baby’s birth will be 0 months 0 days.
•Check the clock and birthday settings if the age shown is incorrect.
•Note that if you have selected [WITHOUT AGE], age information will not be recorded for any pictures you take. The information will not appear even if you select [WITH AGE] after taking pictures.
•For resetting the birthday setting, use [RESET] in the [SETUP] menu. (P24)
64
VQT0S46