Preparation

Charging the Battery with the Charger

When the camera is shipped, the battery is

not charged. Charge the battery before 3 Detach the battery. use.

1 Attach the battery with attention to the direction of the battery.

2 Connect the AC Cable.

The AC Cable does not fit entirely into the AC input terminal. A gap will remain as shown below.

When the [CHARGE] indicator A lights in green, charging starts.

When the [CHARGE] indicator A turns off (in about 130 minutes), charging is completed.

12

After charging is completed, be sure to disconnect the AC Cable from the electrical outlet.

The battery becomes warm after use/ charge or during charge. The camera also becomes warm during use. However, this is not a malfunction with the camera.

The battery will discharge if left for a long time after charging. Recharge it.

Use the dedicated charger and battery.

Charge the battery with the charger indoors.

Do not disassemble or modify the charger.

VQT0S46

Page 12
Image 12
Panasonic DMC-LX1GN operating instructions Charging the Battery with the Charger