Preparation
nTo view the LCD monitor outdoors on a bright sunny day (Power LCD
function)
When you press and hold the [DISPLAY/ PWR LCD] button for 1 second, the power LCD function is activated, the LCD monitor becomes brighter than usual and easier to see outdoors.
nRecording guide line
When you align the subject on the horizontal and vertical guide lines or the cross point of these lines, you can take pictures with
ON:PRESS 
FOR 1 SEC.
A 
A: Power LCD indication
•When you take pictures, the LCD monitor automatically reverts back to the normal brightness 30 seconds after the [DISPLAY/PWR LCD] button is pressed. If you press any button, the LCD monitor turns on brightly again.
•If you press and hold [DISPLAY/PWR LCD] button for 1 second again, the power LCD function is cancelled and the LCD monitor reverts back to its usual brightness.
•In the power LCD function, the brightness and colour tone are emphatically displayed on the LCD monitor. Therefore, the brightness and the colour tone may look different from those in real life depending on the subject. However, this function does not affect recorded pictures.
nHighlight display
When setting [HIGHLIGHT] to [ON] on the [SETUP] menu (P24) while the auto review or review function is activated, any white saturated area (extremely bright or glistening part) on the picture appears blinking in black and white.
•If you compensate the exposure to minus, referring to the histogram and then take a picture again, it may result in a good picture.
No highlight display
REVIEW1X
EXIT 
4X
DELETE
With highlight display
REVIEW1X
EXIT
4X
DELETE
27
VQT0S46
